Abstract:Pulsed laser welding of SUS 304 stainless steel under different laser focusing conditions was performed in this study. A multi-information synchronous monitoring system was developed in experiment. The electron temperature signal, audible acoustic signal and acoustic emission signal were detected in pulsed laser welding to characterize the behavior of plasma plume. The fluctuation of physical characteristic parameters was calculated to analyze the influence of focusing condition on the welding thermal effect and laser induced plasma. The results showed that the focusing condition results in different energy absorption behavior of plasma in heat conduction welding mode and deep penetration welding mode. The energy absorption behavior of plasma to laser beam can be characterized by plasma signals and physical characteristic parameters effectively. The keyhole effect and energy density distribution of the laser beam acting on the materials, which closely relate to the focusing condition, are important factors to affect the energy absorption mechanism of plasma plume. With sufficient laser energy density and no keyhole effect, a strong plasma plume may be induced in heat conduction welding mode. High intensity plasma plume above the molten pool promotes the inverse bremsstrahlung absorption effect in laser welding, which shields the effective absorption of materials to laser energy. But the keyhole effect contributes to the absorption efficiency of the materials to the energy of plasma and laser. Once the energy density of laser beam is enough to induce keyhole effect, the inverse bremsstrahlung absorption effect of plasma is attenuated.

Laser-induced Plasma Control in CO 2 Laser Welding

Study on Side Assist Blowing Gas with Different Composition in High Power CO_2 Laser Welding

Sensing and Control System of Process Quality in Co2 Laser Deep Penetration Welding

Double Closed-Loop Control of the Focal Point Position in Laser Beam Welding

Mechanism, Modeling, and Application of Plasma Current in Deep-Penetration Laser Welding

Research progress of laser welding under subatmospheric pressure

The Behavior and Its Control of Plasma Produced During Laser Welding

Controlling The Plasma Of Deep Penetration Laser Welding To Increase Power Efficiency

Investigation on Porosity Suppression in Deep-Penetration Laser Welding by Using Computational Fluid Dynamics

Active control effect of shielding gas flow on high-power fiber laser welding plume

Development of the Plasma Detecting System in CO 2 Laser Welding

Penetration Monitoring and Control of CO 2 Laser Welding with Coaxial Visual Sensing System

Simple Plasma Current Model and Its Application in Laser Beam Welding

Coaxial monitoring and penetration control in CO2 laser welding (I) - Penetration status characteristics and coaxial monitoring

Effect of Focusing Condition on Laser Energy Absorption Characteristics in Pulsed Laser Welding

Understanding the Effect of Oxygen on Weld Pool and Keyhole in Laser Beam Welding

Coaxial Monitoring of Penetration in CO2 Laser Welding

Three-Dimensional Transient Simulation of Laser Deep-penetration Welding Based on Combined Heat Source

Plasma light emission monitoring and penetration status recognition in CO2 laser welding of AZ31B wrought magnesium alloy - art. no. 682502

ICONE19-43939 Phenomenological Evaluation of Laser-Irradiated Welding Processes with a Combined Use of Higher-Accuracy Experiments and Computational Science Methodologies : (5) Numerical Simulation of the Welding Processes with a Multi-Dimensional Multi-Physics Analysis Code SPLICE

Effect of Shielding Gas on the Plasma Plume in Pulsed Laser Welding