Abstract:The insulation coordination for converter station is one of the key technologies to implement flexible DC power transmission projects, and the results of the research on this field can provide important guidance to the design, type selection, manufacture and test of converter equipments in converter stations. To decide insulation levels for equipments of converter stations in Zhoushan multi-terminal flexible DC power transmission project reasonably, the arrester layout schemes for converter stations are proposed; corresponding arrester parameters and protection levels are calculated; the recommended insulation margins for equipments in converter stations are given and based on the selected equipment insulation margins the insulation levels for equipments in converter stations are finally determined. Insulation coordination results corresponding to three different arrester layout schemes are given and the coordination results show that different arrester layout schemes mainly influence on the insulation levels among terminals of reactors connected to bridge arms:for the first arrester layout scheme, the insulation levels of lightning impulse and that of switching impulse among reactor terminals connected to bridge arms are 450 kV and 325 kV respectively, and for the second and the third arrester layout schemes the insulation levels among reactor terminals connected to bridge arms are the same and the insulation level of lightning impulse and that of switching impulse are 750 kV and 550 kV respectively. Except reactors connected to bridge arms, the recommended insulation levels for other equipments in converter stations under all arrester layout schemes are the same;for AC equipments at valve side of converter transformer the insulation levels of lightning impulse are recommended as 650 kV (or 750 kV) and the insulation level of switching impulse is recommended as 550 kV; the insulation level of lightning impulse and that of switching impulse for AC equipments at valve side of bridge arm reactors are taken the same as these for equipments at valve side of converter transformer; the insulation levels of lightning impulse of 200 kV DC buses in converter stations are recommended as 650 kV (or 750 kV) and that of switching impulse is recommended as 550 kV; the insulation levels of lightning impulse and these of switching impulse among terminals of DC smoothing reactors are taken as 850 kV (or 950 kV) and 750 kV respectively. Besides, the advantages and disadvantages of the three arrester layout schemes are analyzed. Results of this research topic can offer important foundation for Zhoushan multi-terminal flexible DC power transmission project and are available for reference to other VSC-HVDC projects.

Scheme Optimization of 500 Kv Main Electrical Connection in Fuzhou UHV Substation

Study on Optimal Setting of UFLS & UVLS in Jiangsu Grid——Method Description and Contingency Simulation

Study on Optimal Setting of UFLS and UVLS in Jiangsu Grid——The Measure of Study and the Acquirement of Dynamic Model Parameter

Analysis on Insulation Coordination Scheme for ±800 Kv DC Converter Station

A Real-Time Power Flow Optimal Control Method for Hybrid AC/DC Power Systems with VSC-HVDC

Optimization Configuration of High Voltage Reactors in Large Power Grid

Optimal Adjustment of Power Network Structure by Considering Static Voltage Stability and Short-Circuit Current Level of Multi-Infeed DC Systems

Optimal reactive power flow model for AC/DC hybrid power grid with voltage source converters

The Construction Principle of 500 Kv Terminal Substation and Its Application

Research on key issues of insulation coordination for ±1 100 kV UHVDC converter station

Comparison of Insulation Coordination Between ±800kv and ±1100kv UHVDC Systems

Study and design of main circuit parameters for ±800 kv/7500 MW DC power transmission project from Xiluodu to Zhexi

Overvoltage Protection and Insulation Coordination for ?1 100 Kv UHVDC Converter Station

Overvoltage Protection and Insulation Coordination for ±1100 kV UHVDC Converter Station

Study and Design of Main Circuit Parameters for ±800 kV/7 500 MW DC Power Transmission Project From Xiluodu to Zhexi

Research on Insulation Coordination for Converter Stations of Zhoushan Multi-Terminal VSC-HVDC Transmission Project

Study on 500kV Electrical Main Connections of Ji'nan UHV Substation

Upgrading of 10 Kv Distribution Transformer and Prefabricated Substation to 20 Kv Voltage Level

Overvoltage and insulation coordination for ±1100 kV UHVDC converter station

A study on system connection schemes for ±1100 kV UHVDC sending and receiving ends

Grounding Methods of Multi-Terminal VSC-HVDC System Based on Modular Multi-level Converter