Evolution of Insoluble Eutectic Si Particles in Anodic Oxidation Films During Adipic-Sulfuric Acid Anodizing Processes of ZLll4A Aluminum Alloys

Chi‐Un Lei,Hua,Jianhua,Ming Liu,Songmei,Qing Li,Mei,Yuanyuan Wang,Hong Wang,Yongxin,Yang Cui

DOI: https://doi.org/10.1007/s12613-015-1074-2

2015-01-01

Abstract:The effects of insoluble eutectic Si particles on the growth of anodic oxide films on ZL114 A aluminum alloy substrates were investigated by optical microscopy(OM) and scanning electron microscopy(SEM). The anodic oxidation was performed at 25°C and a constant voltage of 15 V in a solution containing 50 g/L sulfuric acid and 10 g/L adipic acid. The thickness of the formed anodic oxidation film was approximately 7.13 μm. The interpore distance and the diameters of the major pores in the porous layer of the film were within the approximate ranges of 10–20 nm and 5–10 nm, respectively. Insoluble eutectic Si particles strongly influenced the morphology of the anodic oxidation films. The anodic oxidation films exhibited minimal defects and a uniform thickness on the ZL114 A substrates; in contrast, when the front of the oxide oxidation films encountered eutectic Si particles, defects such as pits and non-uniform thickness were observed, and pits were observed in the films.