Abstract:Some compounds of arsenic are extremely toxic to the human body even at low levels. Long-term exposure from drinking contaminated water causes adverse health effects. This has led the European Union and other global organizations to reduce the maximum residue limit for the total arsenic up to 10 μg L-1 in water for human consumption. The toxicity of arsenic depends on the oxidation state, chemical structure and solubility in the biological environment. Main analytical procedures report on the determination of arsenic species in water samples which have been developed based on atomic spectroscopy -speciation performed in the sample treatment step- and inductively coupled plasma-mass spectrometry (ICP-MS). In such cases, speciation is performed by coupling to high-performance liquid chromatography (HPLC). As far as we know, the determination of arsenic species in water samples at low concentration levels by capillary electrophoresis (CE) coupled to electrospray mass spectrometry (ESI-MS) has not been described up to now. In this research CE-ESI(-)-MS is proposed for the identification and simultaneous quantification of organic and inorganic arsenic species in water samples for human consumption. The target compounds were dimethylarsinate (DMA), mono-methylarsonate (MMA), arsenite (i-As(III)) and arsenate (i-As(V)). Optimization of the composition and nature of both the electrophoretic separation medium -using hexafluoro-2-propanol (HFIP) as an additive- and the sheath liquid was performed and aimed at achieving the best sensitivity and separation efficiency for the CE-ESI(-)-MS coupling. Two simple sample treatments were proposed: one based on dispersive liquid-liquid micro-extraction (DLLME) intended for a rapid determination of the total content of inorganic arsenic in the water sample; and the second based on partial evaporation of the water sample to detect each of the four main arsenic species. For the second, limits of detection between 0.02 and 0.04 μg L-1 were found, which are similar results as the ones achieved with methods based on HPLC-ICP-MS. The DLLME + CE-ESI(-)-MS method was applied to the determination of total inorganic arsenic in eleven water samples in the province of Salamanca (Spain). Five of the analyzed samples had values close to, or superior to the maximum residue limit for the total of arsenic in water intended for human consumption (10 μg L-1). The validated method CE-ESI(-)-MS for arsenic speciation was applied with success to the analysis of the weakly mineralized water sample (dry residue < 50 mg L-1) of both groundwater and bottled water.

Fluorimetric Determination of Arsenite and Arsenate in Water Using Fluorescein and Iodine

Determination of Inorganic Arsenic Species in Drinking Water by Cloud Point Extraction Coupled with Ultraviolet-Visible Spectrophotometry

Off-line separation and determination of inorganic arsenic species in natural water by high resolution inductively coupled plasma mass spectrometry with hydride generation combined with reaction of arsenic(V) and L-cysteine

Determination of Arsenate by Sorption Pre-Concentration on Polystyrene Beads Packed in A Microfluidic Device with Chemiluminescence Detection

Simple colorimetric assay using pectin hydrogel reagent coupled with camera-based photometry for trace arsenic determination

An All-Solid-state Ion-Selective Electrode with Ag3AsO4 As the Sensitive Membrane for Detecting Arsenate in Aqueous Environments

Flow injection on-line sorption preconcentration coupled with hydride generation atomic fluorescence spectrometry for determination of (ultra)trace amounts of arsenic(III) and arsenic(V) in natural water samples

Determination of arsenic speciation in sulfidic waters by Ion Chromatography Hydride-Generation Atomic Fluorescence Spectrometry (IC-HG-AFS)

Mercaptosuccinic Acid Modified CdTe Quantum Dots As a Selective Fluorescence Sensor for Ag+determination in Aqueous Solutions

Ultrasound assisted dispersive solid phase microextraction of inorganic arsenic from food and water samples using CdS nanoflowers combined with ICP-OES determination

DETERMINATION OF As(Ⅲ)and As(Ⅴ)BY HYDRIDE GENERATION ATOMIC FLUORESCENCE SPECTROMETRY WITH ANALYTIC FACTOR FROM STANDARD CURVE EQUATION

Total and Inorganic Arsenic Determination in Soil, Sediments, and Sludge by Hydride Generation High-Resolution Continuum Source Quartz Tube Atomic Absorption Spectrometry in Dilute Hydrochloric Acid Using Borohydride and L-Cysteine

High sensitivity atomic fluorescence spectroscopy for the detection of AsIII by selective electrolysis of arsenic on nanoflowers-like Fe/NFE

Flotation of sub-microgram amounts of arsenic coprecipitated with iron (III) hydroxide from natural waters and determination of arsenic by atomic-absorption spectrophotometry following hydride generation

Highly Sensitive Determination of Arsenic in Water Samples by Hydrogen-Doped Solution Anode Glow Discharge-Optical Emission Spectrometry

Facilitating inorganic arsenic speciation and quantification in waters: Polymer inclusion membrane preconcentration and X-ray fluorescence detection

A simple and rapid head space-single drop microextraction-‘spectro-pipette’ (HS-SDME-SP) method for the on-site measurement of arsenic species in natural waters

DETERMINATION OF FOUR ARSENIC SPECIES IN ALGAE BY HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY COUPLED WITH HYDRIDE GENERATION ATOMIC FLUORESCENCE SPECTROMETRY

Capillary electrophoresis coupled to electrospray mass spectrometry for the determination of organic and inorganic arsenic compounds in water samples

Bi-anode Electrochemical Hydride Generation Atomic Fluorescence Spectrometry for the Determination of Arsenic in Seawater

Electrochemical determination of arsenite in neutral media on reusable gold nanostructured films