Total and Inorganic Arsenic Determination in Soil, Sediments, and Sludge by Hydride Generation High-Resolution Continuum Source Quartz Tube Atomic Absorption Spectrometry in Dilute Hydrochloric Acid Using Borohydride and L-Cysteine

Lucia Chirita,Tiberiu Frentiu,Michaela Ponta,Eniko Covaci

DOI: https://doi.org/10.1080/00032719.2023.2258239

2023-09-21

Analytical Letters

Abstract:A sensitive and interference-free method based on hydride generation high-resolution continuum source quartz tube atomic absorption spectrometry in dilute HCl was developed for total and inorganic As (tAs, iAs) determination in soil, sediments, and sludge. Sample preparation involved microwave-assisted digestion in aqua regia for tAs and extraction in 10 mol L −1 HCl for iAs. In both cases, the prereduction of As(V) to As(III) was carried out with L-cysteine, while derivatization to arsine with 0.6% NaBH 4 was performed in the presence of 0.2% L-cysteine in 0.01 mol L −1 HCl (pH 2.00 ± 0.01). Inorganic arsenic determination was validated with 87 ± 7% extraction efficiency. The recovery of tAs in certified reference materials was 98 ± 23%, while the value for iAs in spiked samples was 95 ± 10%. The method was selective for iAs determination and did not require separation of iAs by liquid-liquid extraction in an organic solvent. The results were verified using the Tukey's multiple comparison test for p > 0.05 (experimental values 0.063 to 0.999). The method is greatly simplified due to no requirement for the separation of iAs species, absence of spectral interference, similar derivatization conditions for tAs/iAs, and possibility of using external calibration. The limits of detection for tAs and iAs were 0.006 mg kg −1 . Concentrations of 0.37–545 mg kg −1 tAs and 0.33–280 mg kg −1 iAs in real samples were determined with precisions from 3.7 to 12.2% and 6.8 to 15.0%.

chemistry, analytical