Inorganic arsenic speciation in rice products using selective hydride generation and atomic absorption spectrometry (AAS)

Greice Magalhães dos Santos,Dirce Pozebon,Camila Cerveira,Diogo P. de Moraes

DOI: https://doi.org/10.1016/j.microc.2017.03.025

IF: 5.304

2017-07-01

Microchemical Journal

Abstract:The present study is about chemical speciation analysis of inorganic As (iAs) in rice products using hydride generation atomic absorption spectrometry (HG-AAS). Selective generation of arsine from As(III) was achieved with 0.1% (m/v) NaBH4 and 10molL−1 HCl. Inorganic arsenic (iAs) was determined by As pre-reduction (in 4% m/v KI+0.8% m/v ascorbic acid+1.9molL−1 HCl) followed by determination under the same conditions used for As(III). The As(V) concentration was estimated by difference among iAs and As(III). Total arsenic (tAs) in the samples of solid rice products was extracted with 2% (m/v) K2S2O8 and 10% (m/v) HNO3 whereas liquid rice products were simply diluted with 0.28molL−1 HNO3. Samples of rice products (flour, biscuit, pasta, milk powder, cake, dairy beverage, vinegar, wine and beer were analyzed). For solid products, the limits of quantification (LOQs) of the method were 5.4ngg−1 As(III), 15ngg−1 iAs, and 23ngg−1 tAs. The mean concentrations of As(III), iAs, and tAs ranged from 12.3 to 71.8ng g−1, 29.8 to 82.9ngg−1, and 35.8 to 136±ngg−1, respectively. In most cases, iAs concentration was approximately 60% to 80% of tAs concentration. For liquid samples, the LOQs were 0.54 to 2.7μgL−1As(III), 0.94 to 9.4μgL−1 iAs and 1.1 to 5.7μgL−1 tAs, depending on the sample dilution. The iAs concentration in the analyzed liquid samples was <the LOQs while the mean concentrations of As(III) and tAs were <LOQ to 11.4μgL−1, and 1.35 to 24.6μgL−1, respectively. It was demonstrated that the proposed methodology is feasible for arsenic speciation in rice products whose LOQ meets the current legislation.

chemistry, analytical