Abstract:Environmental concern about automotive shredder residue (ASR) has increased in recent years due to its harmful content of heavy metals. Although several approaches of ASR management have been suggested, these approaches remain commercially unproven. This study presents an alternative approach for ASR management where advanced materials can be generated as a by-product. In this approach, titanium nitride (TiN) has been thermally synthesized by nitriding pressed mixture of automotive shredder residue (ASR) and titanium oxide (TiO2). Interactions between TiO2 and ASR at non-isothermal conditions were primarily investigated using thermogravimetric analysis (TGA) and differential scanning calorimetry. Results indicated that TiO2 influences and catalyses degradation reactions of ASR, and the temperature, at which reduction starts, was determined around 980 °C. The interaction between TiO2 and ASR at isothermal conditions in the temperature range between 1200 and 1550 °C was also studied. The pressed mixture of both materials resulted in titanium nitride (TiN) ceramic at all given temperatures. Formation kinetics were extracted using several models for product layer diffusion-controlled solid-solid and solid-fluid reactions. The effect of reactants ratio and temperature on the degree of conversion and morphology was investigated. The effect of reactants ratio was found to have considerable effect on the morphology of the resulting material, while temperature had a lesser impact. Several unique structures of TiN (porous nanostructured, polycrystalline, micro-spherical and nano-sized structures) were obtained by simply tuning the ratio of TiO2 to ASR, and a product with appreciable TiN content of around 85% was achieved after only one hour nitridation at 1550 °C.

Molten Salt-Assisted synthesis of Titanium Nitride

Molten Salt‐Assisted Synthesis of Titanium Nitride

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Rapid-Heating-Triggered in Situ Solid-State Transformation of Amorphous TiO2 Nanotubes into Well-Defined Anatase Nanocrystals

Low-Temperature Synthesis of Titanium Oxynitride Nanoparticles

General Fabrication of Boride, Carbide, and Nitride Nanocrystals Via a Metal-Hydrolysis-Assisted Process.

Two-Dimensional Atomically Thin Titanium Nitride Via Topochemical Conversion.

Two-step solid-state synthesis of ternary nitride materials

Titanium metallization of Si3N4 ceramics by molten salt reaction: Mechanism and interfacial structure

Low-temperature Synthesis of TiB2 Nanocrystals Using TiO2 ,LiBH4 and Mg

Waste Conversion into High-Value Ceramics: Carbothermal Nitridation Synthesis of Titanium Nitride Nanoparticles Using Automotive Shredder Waste.

Photocatalytic Activity of Nitrogen Doped Nano-titanias and Titanium Nitride towards Methylene Blue Decolouration

Molten Salt Assisted Synthesis of Black Titania Hexagonal Nanosheets with Tuneable Phase Composition and Morphology

Low-Temperature Synthesis of Nanocrystalline Titanium Nitride via a Benzene-Thermal Route

Additive-assisted synthesis of boride, carbide, and nitride micro/nanocrystals

Temperature-dependent optical properties of titanium nitride

Synthesis of titanium nitride via hybrid nanocomposites based on mesoporous TiO2/acrylonitrile

Optical Properties of Titanium Oxynitride Nanocrystals Synthesized Via a Thermal Liquid–solid Metathesis Reaction

Efficient synthesis of single-crystalline Na2Ti6O13 nanoribbons

Silica-coating-assisted nitridation of TiO2 nanoparticles and their photothermal property

Efficient and cost-effective method to synthesize highly purified Ti4AlN3 and Ti2AlN