Abstract:As the integration of chips in 3D integrated circuits (ICs) increases and the size of micro-bumps reduces, issues with the reliability of service due to electromigration and thermomigration are becoming more prevalent. In the practical application of solder joints, an increase in the grain size of intermetallic compounds (IMCs) has been observed during the reflow process. This phenomenon results in an increased thickness of the IMC layer, accompanied by a proportional increase in the volume of the IMC layer within the joint. The brittle nature of IMC renders it susceptible to excessive growth in small-sized joints, which has the potential to negatively impact the reliability of the welded joint. It is therefore of the utmost importance to regulate the formation and growth of IMCs. The following paper presents the electrodeposition of a Ni-W layer on a Cu substrate, forming a barrier layer. Subsequently, the barrier properties between the Sn/Cu reactive couples were subjected to a comprehensive and systematic investigation. The study indicates that the Ni-W layer has the capacity to impede the diffusion of Sn atoms into Cu. Furthermore, the Ni-W layer is a viable diffusion barrier at the Sn/Cu interface. The "bright layer" Ni2WSn4 can be observed in all Ni-W coatings during the soldering reflow process, and its growth was almost linear. The structure of the Ni-W layer is such that it reduces the barrier properties that would otherwise be inherent to it. This is due to the "bright layer" Ni2WSn4 that covers the original Ni-W barrier layer. At a temperature of 300 °C for a duration of 600 s, the Ni-W barrier layer loses its blocking function. Once the "bright layer" Ni2WSn4 has completely covered the original Ni-W barrier layer, the diffusion activation energy for Sn diffusion into the Cu substrate side will be significantly reduced, particularly in areas where the distortion energy is concentrated due to electroplating tension. Both the "bright layer" Ni2WSn4 and Sn will grow rapidly, with the formation of Cu-Sn intermetallic compounds (IMCs). At temperatures of 250 °C, the growth of Ni3Sn4-based IMCs is controlled by grain boundaries. Conversely, the growth of the Ni2WSn4 layer (consumption of Ni-W layer) is influenced by a combination of grain boundary diffusion and bulk diffusion. At temperatures of 275 °C and 300 °C, the growth of Ni3Sn4-based IMCs and the Ni2WSn4 layer (consumption of Ni-W layer) are both controlled by grain boundaries. The findings of this study can inform the theoretical design of solder joints with barrier layers as well as the selection of Ni-W diffusion barrier layers for use in different soldering processes. This can, in turn, enhance the reliability of microelectronic devices, offering significant theoretical and practical value.

First-Principles Study of Ni Additions on Mechanical Properties of Η'-Cu6sn5-Based Intermetallic Compounds

First-Principles Study of Cu Addition on Mechanical Properties of Ni3Sn4-Based Intermetallic Compounds

A first-principles study of the mechanical and physical properties of Ni 3 Sn x intermetallic compounds for high-temperature power device packaging

First-principles Investigation of the Structural and Electronic Properties of Cu6−xNixSn5 (x=0, 1, 2) Intermetallic Compounds

Theoretical and experimental investigations on mechanical properties of (Fe,Ni)Sn2 intermetallic compounds formed in SnAgCu/Fe-Ni solder joints

Effects of additive elements on structural and electronic properties of Sn-based intermetallics by first principles

Effect of Ni and Pd Addition on Mechanical, Thermodynamic, and Electronic Properties of AuSn4-Based Intermetallics: A Density Functional Investigation

Effects of Doping Trace Ni Element on Interfacial Behavior of Sn/Ni (Polycrystal/single-Crystal) Joints

Potential Mechanisms of Interstitial Atomic Enhancement and Interface Failure Behavior in Ni 3 Co/Cu Systems

Mechanical Property Of Cu-Sn-Ni Intermetallics In The Full Intermetallic Micro-Joints Formed With Transient Liquid Phase Soldering

First-Principles calculations of structural, thermodynamic and electronic properties of intermetallic compounds in solder

First-principles calculation of the effects of In doping on η-Cu 6 Sn 5 structure, elastic anisotropy, electronic properties and fracture toughness

Effects of 1.0% Zn or Ni Additions on Interfacial Reaction and Growth of Intermetallics in Sn-3. 5ag/cu Joint

Microstructural evolution of Cu–Sn–Ni compounds in full intermetallic micro-joint and in situ micro-bending test

Effect of Ni and Ni-Coated Carbon Nanotubes on the Interfacial Reaction and Growth Behavior of Sn58bi/Cu Intermetallic Compound Layers

Investigation of the Influence of Alloy Atomic Doping on the Properties of Cu-Sn Alloys Based on First Principles

Diffusion Barrier Performance of Ni-W Layer at Sn/Cu Interfacial Reaction

First-Principles Calculations of Structural and Mechanical Properties of Cu–Ni Alloys

Synergistic Effects of Alloy Elements on the Structural Stability, Mechanical Properties and Electronic Structure of Ni3Sn4: Using First Principles

Interfacial transfer and phase evolution between Cu and Sn solder doped with minor Cu, Ag and Ni: experimental and theoretical investigations

Influence of Crystalline Structure on Diffusion Barrier Property of Electroless Ni–Fe–P Coatings in Zn–Al Solder Interconnects