Abstract:Rotating cavities with axial throughflow are found inside the compressor rotors of turbo-machines. The flow pattern and heat transfer in the cavities are known as sophisticated problems. Because of the numerical errors and model errors, as well as the stiffness introduced by low-Ma number, prediction of 3D unsteady flow and heat transfer in rotating cavity is still a challenge for modern CFD technology. An in-house 3D unsteady CFD code was developed in this study. The discontinuous galerkin method, which can fulfill any high-order accuracy on the unstructured grid, was applied to reduce the discretization errors. The SST-γ-Reθ transition model proposed by Menter was applied to reduce the model errors. To overcome the stiffness and achieve good convergence characteristics and solution quality, the preconditioning matrix technique combined with DG method was introduced for low-Ma number viscous flow. First, natural convection of air in a square cavity was studied to test the code. The feasibility and credibility, of applying the DG method and the preconditioned matrix technique for buoyancy–induced Rayleigh-Bénard like flow, were further verified. Second, the 3D compressible flow field in a rotating cavity was investigated numerically using the FV method, DG method and laminar/SA/SST-transition turbulence model. It is demonstrated that the whole flow structure of all calculated cases was similar after comparing the calculated results with the available experimental data. But, the transition turbulence model fitted the experimental data better. On the other hand, the performance of high-order method was much better for both the rotating cavity flow and natural convection, in terms of heat transfer. To better understand this phenomenon, an accuracy analysis of heat flux using DG method and FV method was performed. It showed the DG method could realize arbitrary precision of viscous stress and heat fluxes on irregular unstructured grids, while the FV method could only realize the first-order accuracy of the heat fluxes at the boundary faces and may exhibit erroneous behaviors. It also demonstrated that the high-order accuracy of gradients was needed to decrease errors of heat fluxes and viscous stresses, and that DG method was a promising method.

Large-eddy Simulation of Non-Isothermal Flow and Heat Transfer in an Enclosed Rotor-Stator Cavity

Periodic Fluid Flow And Heat Transfer In A Square Cavity Due To An Insulated Or Isothermal Rotating Rectangular Object

Numerical investigation on the flow and heat transfer in a rotor-stator disc cavity

An Entropy Viscosity Method for Large Eddy Simulation of Turbulent Thermal Flow in a Rotor–stator Cavity

Experimental Investigation of Heat Transfer in a Rotor–stator Cavity with Cooling Air Inlet at Low Radius

The Numerical Simulation Of Turbulent Flow In Semi-Closed Rotor Stator Cavity

The Highly Turbulent Flow and Heat Transfer in Semi-Closed Rotating Disc Cavity

Numerical study of flow and heat transfer in twin web rotor disk's axial throughflow cavity

Numerical Investigation of Windage Heating Within Shrouded Rotor-Stator Cavity System with Central Inflow

Investigations of an Enclosed Annular Rotor-Stator System with LES Method

Flow and Heat Transfer in a Rotating Disc Cavity With Axial Throughflow at High Speed Conditions

Study on transition to turbulence of rotating-disk boundary layer in a rotor-stator cavity with temperature gradient

Numerical Investigation of Turbulent Flow in an Open Rotor-Stator System

Experimental Study of Flow Resistance and Heat Transfer in Rotor-Stator Cavity for High Pressure Turbine

High-order Large Eddy Simulations of Confined Rotor-Stator Flows

Computational Investigation of Heat Transfer Characteristics of Counter-Rotating Turbine Disks with Annulus

Prediction of 3d Unsteady Flow and Heat Transfer in Rotating Cavity by Discontinuous Galerkin Method and Transition Model

Large-eddy simulation of axial, radial and mixed centrifugal convection in a closed rotating cavity

Heat Transfer Characteristics Of A Rotor-Stator System With Small Radial Outflow

Investigation Of The Unstable Flow Structure In A Rotating Cavity

Flow and heat transfer characteristics in a pre-swirl rotor-stator cavity