Abstract:In gas turbines, the stator wells play a key role in the efficiency of the turbomachine. The research for performance gains requires a good understanding and an accurate modeling of the flows and heat transfers occurring in these areas. Within the framework of the European program main annulus gas path interaction (MAGPI) WP1, a two-stage axial turbine test rig provided an experimental database used to validate the computational fluid dynamics (CFD) models. The aim of this study is to setup a numerical methodology using the CFD solver ANSYS Fluent to accurately predict the conjugate heat transfer in the stator well area. The validation of the methodology relies on thorough comparison of the results with the MAGPI WP1 experimental temperature/pressure measurements. A geometry with axial cooling injection through lock plate slot was chosen. A Reynolds-averaged Navier–Stokes (RANS) three-dimensional sectorized CFD model of the turbine with conjugate heat transfer was used. It includes main gas path, cavities with labyrinths, disks rotor, the casing, and the nozzle guide vanes (NGV). Mixing planes are placed between the static and rotating frames. Different influences (mesh, turbulence model, thermal boundary conditions, radial labyrinths clearances) were studied and compared with experimental data. As a baseline, the first calculations were performed with a cooling flowrate chosen so that hot gas ingresses from the main stream into the stator well cavity. Good agreements between predicted and measured temperatures/pressures were observed, especially in the vicinity of the stator well. Discrepancies were spotted at the first rotor hub endwall and at the upstream wheelspace and will be discussed. Two other cooling configurations were conducted, one with cooling air exiting from the disk rim cavity to the main gas path and the other with the lowest cooling flowrate and so the highest ingress. Finally, the turbine performance under nonadiabatic conditions has been evaluated with an appropriate efficiency definition.

Computational Investigation of Heat Transfer Characteristics of Counter-Rotating Turbine Disks with Annulus

Investigation on Heat Transfer Characteristic and Optimization of the Cooling Air Inlet for the Twin-Web Turbine Disk

Flow Structures and Heat Transfer Characteristics in a Vaneless Counter-Rotating Turbine Cavity with Different Cooling Inflows

LOCAL HEAT TRANSFER AND FLOW CHARACTERISTICS OF ROTATING CAVITY WITH TANGENTIAL PRE- SWIRLING FRINGE GUIDE VAN AND RADIAL OUTLET

Experimental Investigation of Heat Transfer in a Rotor–stator Cavity with Cooling Air Inlet at Low Radius

A Computational Investigation of Hot Gas Ingress Through the Rim Seal of A Counter-Rotating Turbine Cavity with Annulus

Numerical investigation on the flow and heat transfer in a rotor-stator disc cavity

Experimental Investigation of Unsteady Heat Transfer Between Counter-Rotating Disks

Experiment Investigation of Unsteady Heat Transfer Between Co-Rotating Disks

Experimental Investigation on Heat Transfer in Shrouded Rotating Disk with High-Positioned Air Inflow

The Highly Turbulent Flow and Heat Transfer in Semi-Closed Rotating Disc Cavity

Experimental Study of Flow Resistance and Heat Transfer in Rotor-Stator Cavity for High Pressure Turbine

Numerical Investigations of Flows and Heat Transfer in Turbine Disk Cavities

Numerical Simulation of Fluid Flow and Heat Transfer in Shrouded Rotating Disk with High Positioned Axial Inlet

Convective Heat Transfer of a Rotating Multi-Stage Cavity with Axial Throughflow

Numerical Investigation of Fluid Flow and Heat Transfer Characteristics Within a Rotating Cavity with a High Positioned Axial Inlet and a Radial Outlet

Numerical Investigation of Windage Heating Within Shrouded Rotor-Stator Cavity System with Central Inflow

Study on Flow and Heat Transfer Characteristics of Two Axial Preswirl Structures

Investigation of Flow Instability in Rotating Cavity with Axial Throughflow of Cooling Air

Numerical study of flow and heat transfer in twin web rotor disk's axial throughflow cavity

Heat transfer measurements on a rotating disk with discrete receiver holes