Abstract:In this study, we demonstrate the direct in-situ synthesis of NiTi alloys with tunable chemical composition (Ni/Ti atomic ratio) and corresponding thermomechanical response. This synthesis is achieved by regulating the feeding speed ratio of pure Ni and Ti wires during the additive manufacturing process based on dual-wire-feed electron beam directed energy deposition (EB-DED) technology. Under appropriate process conditions, the resulting NiTi alloys exhibit a controllable evolution around the nearequiatomic composition and display a typical columnar grain morphology characteristic of additively manufactured NiTi alloys. With an increase in Ni content (shifting from Ti-rich to Ni-rich), the second phase particles present in the samples change from Ti-rich phase (Ti2 Ni) to Ni-rich phases (such as Ni4 Ti3 and Ni3 Ti2 ). The phase transformation temperatures gradually decrease with increasing Ni content, and the predominant matrix phase transitions from martensite to austenite. The as-built NiTi alloy exhibits a typical tensile curve with a good tensile elongation of 11 %, fabricated under suitable composition and microstructure conditions. This result surpasses values reported in current in-situ synthesized NiTi alloys through additive manufacturing methods. Moreover, it almost reaches the levels achieved by additively manufactured NiTi alloys using pre-alloyed raw materials. Furthermore, this study reports, for the first time in the field of in-situ synthesized NiTi alloys, a good tensile shape memory effect, achieving an impressive recovery rate of up to 70 % under a tensile strain of 6 %. This investigation provides a meaningful theoretical perspective and technical strategy for the integrated customization of NiTi alloy components in structure, composition, and function. This low-cost and high-efficiency approach is particularly attractive for the preparation of functional graded, large-scale and disposable NiTi components. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Microstructure and Properties of a Shape Memory Alloy Ti–Ni–Al–V Fabricated by Double-Wire Arc Additive Manufacturing

Microstructures and mechanical properties of NiTi shape memory alloys fabricated by wire arc additive manufacturing

Zur Biogenese des Erythromycins

Microstructure and properties of NiTi shape memory alloy fabricated by double-wire plasma arc additive manufacturing with a nearly equal atomic ratio

Microstructure and Properties of a Novel Ni-Ti-Cr-Mo-Nb Alloy Fabricated in Situ by Dual-Wire Arc Additive Manufacturing

Microstructure and mechanical properties of Ti-3Al-2V alloy by dual wire + arc additive manufacturing

Microstructure and properties of a Ni–Ti–Cr–Mo–Nb alloy fabricated in situ by dual-wire arc additive manufacturing

Microstructure, Phase Transformation Behavior and Tensile Superelasticity of NiTi Shape Memory Alloys Fabricated by the Wire-Based Vacuum Additive Manufacturing

Microstructure and mechanical properties of Ti 2 Ni alloy fabricated by direct energy deposition

Functional and Mechanical Properties of As-Deposited and Heat Treated WAAM-Built NiTi Shape-Memory Alloy

Microstructure transformation and mechanical behavior in NiTi alloys fabricated by dissimilar double wires arc additive manufacturing

Study on the NiTi Shape Memory Alloys In-Situ Synthesized by Dual-Wire-feed Electron Beam Additive Manufacturing

In-situ fabrication of Ti<sub>2</sub>AlNb-based alloy through double-wire arc additive manufacturing

Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: Microstructure and mechanical properties

Microstructure and mechanical properties of twin wire and arc additive manufactured Ni3Al-based alloy

In-situ ternary wire + arc additive manufacturing thin-walled Ti-Ni-Cu-Al-V component: Microstructure and mechanical properties

Microstructure and Shape Memory Properties of Cu-12.5Al-xMn Alloy Produced by Additive Manufacturing with Powder Core Wire

In-situ Synthesis of NiTi Shape Memory Alloys with Tunable Chemical Composition and Thermomechanical Response by Dual-Wire-feed Electron Beam Directed Energy Deposition

Wire-based directed energy deposition of NiTiTa shape memory alloys: Microstructure, phase transformation, electrochemistry, X-ray visibility and mechanical properties

Additively manufacturing-enabled hierarchical NiTi-based shape memory alloys with high strength and toughness

Microstructure and mechanical properties of Al-Cu alloy during wire and arc additive manufacturing by adding micron TiB2 particles