Abstract:In this study, we demonstrate the direct in-situ synthesis of NiTi alloys with tunable chemical composition (Ni/Ti atomic ratio) and corresponding thermomechanical response. This synthesis is achieved by regulating the feeding speed ratio of pure Ni and Ti wires during the additive manufacturing process based on dual-wire-feed electron beam directed energy deposition (EB-DED) technology. Under appropriate process conditions, the resulting NiTi alloys exhibit a controllable evolution around the nearequiatomic composition and display a typical columnar grain morphology characteristic of additively manufactured NiTi alloys. With an increase in Ni content (shifting from Ti-rich to Ni-rich), the second phase particles present in the samples change from Ti-rich phase (Ti2 Ni) to Ni-rich phases (such as Ni4 Ti3 and Ni3 Ti2 ). The phase transformation temperatures gradually decrease with increasing Ni content, and the predominant matrix phase transitions from martensite to austenite. The as-built NiTi alloy exhibits a typical tensile curve with a good tensile elongation of 11 %, fabricated under suitable composition and microstructure conditions. This result surpasses values reported in current in-situ synthesized NiTi alloys through additive manufacturing methods. Moreover, it almost reaches the levels achieved by additively manufactured NiTi alloys using pre-alloyed raw materials. Furthermore, this study reports, for the first time in the field of in-situ synthesized NiTi alloys, a good tensile shape memory effect, achieving an impressive recovery rate of up to 70 % under a tensile strain of 6 %. This investigation provides a meaningful theoretical perspective and technical strategy for the integrated customization of NiTi alloy components in structure, composition, and function. This low-cost and high-efficiency approach is particularly attractive for the preparation of functional graded, large-scale and disposable NiTi components. (c) 2024 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

Microstructure and properties of NiTi shape memory alloy fabricated by double-wire plasma arc additive manufacturing with a nearly equal atomic ratio

Microstructure and Mechanical Properties of NiTi Alloy Prepared by Double-Wire + Arc Additive Manufacturing Plus In Situ Heat Treatment

Microstructures and mechanical properties of NiTi shape memory alloys fabricated by wire arc additive manufacturing

Study on the NiTi Shape Memory Alloys In-Situ Synthesized by Dual-Wire-feed Electron Beam Additive Manufacturing

Microstructure transformation and mechanical behavior in NiTi alloys fabricated by dissimilar double wires arc additive manufacturing

Functional and Mechanical Properties of As-Deposited and Heat Treated WAAM-Built NiTi Shape-Memory Alloy

Wire and arc additive manufacturing of a Ni-rich NiTi shape memory alloy: Microstructure and mechanical properties

Solidification characterization and its correlation with the mechanical properties and functional response of NiTi shape memory alloy manufactured by electron beam freeform fabrication

Microstructure, Phase Transformation Behavior and Tensile Superelasticity of NiTi Shape Memory Alloys Fabricated by the Wire-Based Vacuum Additive Manufacturing

In-situ Synthesis of NiTi Shape Memory Alloys with Tunable Chemical Composition and Thermomechanical Response by Dual-Wire-feed Electron Beam Directed Energy Deposition

Additively manufacturing-enabled hierarchical NiTi-based shape memory alloys with high strength and toughness

TiNi-Based Bi-Metallic Shape-Memory Alloy by Laser-Directed Energy Deposition

Wire-based directed energy deposition of NiTiTa shape memory alloys: Microstructure, phase transformation, electrochemistry, X-ray visibility and mechanical properties

Characterization of high-strength Ti–Ni shape memory alloys prepared by hot pressed sintering

Research Status and Prospect of Additive Manufactured Nickel-Titanium Shape Memory Alloys

Electron beam freeform fabrication of NiTi shape memory alloys: Crystallography, martensitic transformation, and functional response

In-situ fabrication of Ti<sub>2</sub>AlNb-based alloy through double-wire arc additive manufacturing

MECHANICAL PROPERTIES OF NiTi SHAPE MEMORY THIN FILMS

Laser powder bed fusion additive manufacturing of NiTi shape memory alloys: A review

Fabrication of nickel-titanium-iron shape memory alloys by powder metallurgy route and analyses of their physical and mechanical behaviour

Modulation of characteristic zones in NiTi alloys fabricated via wire arc additive manufacturing