Abstract:High-strength pipeline steel is the optimal choice for continuously transporting large amounts of carbon dioxide (CO2) in the future Carbon capture, utilization and storage (CCUS) industrial chain, and supercritical CO2 (S-CO2) is the ideal phase state from an emitter to an onshore storage site. In CCUS projects, it is very indispensable to carry out the suitability of high steel-grade pipelines to ensure the safe operation of pipelines. It is considered a catastrophic incident for creatures and equipment once pipeline failure when fractures or propagation occurs. In this paper, the fracture propagation velocity of X70, X80, and X90 pipeline materials is calculated base on the high strength line pipe (HLP). Meanwhile, three sets of full-bore fracture (FBR) experiments of S-CO2 pipelines were conducted with similar initial status on an industrial-scale setup, and the decompression wave velocity was obtained with the data acquisition system. The result shows that the initial decompression wave velocity of S-CO2 is about 270 m/s, and the pressure plateau is between 6.8 and 7.3 MPa, corresponding to the decompression wave velocity, which is about in the range of 100-220 m/s. After that, the decompression wave velocity prediction model was established based on the homogeneous equilibrium method (HEM) and the equation of state (Eos), and the prediction results are more conservative than the experimental results. To ensure that the pipeline will not ductilely fracture in the event of a leakage or rupture, X70, X80 and X90 grade steel pipeline design wall thickness and minimum arrest toughness values are determined based on the two-curve method (TCM), respectively. Furthermore, a CO2 pipeline design model is developed based on the experimental data and decompression wave calculation method. The significant experimental data could be used for safety assessment and theoretical model validation in the CO2 transport pipeline and is useful in developing better fracture control models.

Experimental Study of Decompression Wave Characteristics and Steel Pipe Applicability of Supercritical CO2 Pipeline

Experimental Research on the Fracture and Arrest Process of Supercritical CO2 Pipelines

Fracture process characteristic study during fracture propagation of a CO2 transport network distribution pipeline

Investigation on crack propagation and reasonable wall thickness of supercritical CO 2 pipeline

Fracture criterion and control plan on CO2 pipelines: Theory analysis and full-bore rupture (FBR) experimental study

A study on decompression wave propagation characteristics during CO2 pipeline leakage with consideration of gas‐liquid transition

Establishment of a One-Dimensional Model for CO2 Pipeline Rupture Process and Design Recommendations

Experimental Investigation of Stress Corrosion on Supercritical CO2 Transportation Pipelines Against Leakage for CCUS Applications

Analysis Model of Crack Arrest for Supercritical CO2 Pipelines Containing Impurities

Depressurization and Heat Transfer During Leakage of Supercritical CO2 from a Pipeline

A New Model to Predict the Small-hole Decompression Process of Long CO2 Pipeline

Leakage Hazard Distance of Supercritical CO2 Pipelines Through Experimental and Numerical Studies

Burst Pressure Prediction of Subsea Supercritical CO2 Pipelines

Flow Characteristics and Dispersion During the Vertical Anthropogenic Venting of Supercritical CO2 from an Industrial Scale Pipeline

Failure analysis of CO2 corrosion of natural gas pipeline under flowing conditions

Under-expanded Jets and Dispersion in Supercritical CO2 Releases from a Large-Scale Pipeline

Theoretical Study on Upheaval Buckling of Subsea Pipelines with Temperature-Dependent Thermal Properties at Different Carbon Contents

Dynamic fracture study by an experiment/simulation method for rich gas transmission X80 steel pipelines

Investigation of Supercritical CO2 Corrosion Behavior of X80 Carbon Steel in Pipelines: an in Situ Experimental and DFT Study

Numerical Investigation of the Leakage Flow from a Pressurized CO2 Pipeline

GHGT-11 CO 2 pipeline integrity : A coupled fluid-structure model using a reference equation of state for CO 2