Abstract:<p>A circumferential crack in the fusion line is a major threat to the structural integrity of the pipeline girth weld because it may possibly lead to fracture failure when subjected to large plastic deformations. For the newly constructed X80 pipeline with an outside diameter (OD) of 1422 mm in China, the complicated configuration of welded joints and the outer diameter are outside the range of the general fracture assessment standards, such as BS 7910. Furthermore, during the pipe manufacture process, pipeline designers merely specify the minimum yield strength limit according to the pipe steel grade. This results in a wide variation range in the choice of yield strength values of the base metal. This also leads to a serious problem in the fracture assessment of pipe girth weld because the weld strength is commonly considered to be either evenly matched or overmatched. The foregoing factors make it difficult to perform an accurate fracture assessment using conventional standards. This study therefore aims to investigate the fracture behavior of 1422-mm OD pipelines with a double-V groove weld and circumferential crack in the fusion line. The specific effect of material mismatch and the realistic operational parameters that influence the fracture capacity of the pipe are examined via a series of numerical investigations. First, a rigorous three-dimensional finite element model to simulate the pipe girth weld is established by utilizing the ABAQUS finite element code package. The weld, which has a canoe-shaped surface crack in the fusion line between the heat-affected zone and root welding metal, is subjected to biaxial loading conditions. The keyhole method is adopted to simulate the crack front as well as the crack tip to eliminate the stress singularity effect during deformation. A refined mesh strategy is introduced to ensure the accurate simulation of the stress and strain fields in the vicinity of the crack tip. Based on the numerical model, the J-integral fracture parameter, which is clearly defined based on a strict mechanical theory, is chosen to characterize the effect of strength matching ratio, internal pressure, and yield to tensile strength ratio on the crack driving force. A new strain-based J-integral prediction formula is proposed based on numerical results.</p>

Fracture criterion and control plan on CO2 pipelines: Theory analysis and full-bore rupture (FBR) experimental study

Fracture process characteristic study during fracture propagation of a CO2 transport network distribution pipeline

A Simplified Analytical Solution of Pipeline Response under Normal Faulting

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

A study on decompression wave propagation characteristics during CO2 pipeline leakage with consideration of gas‐liquid transition

Evaluation of Blast Wave from Hydrogen Pipeline Burst by a Coupled Fluid-Structure-rupture Approach

Investigation on crack propagation and reasonable wall thickness of supercritical CO 2 pipeline

An experimental investigation on pressure response and phase transition of supercritical carbon dioxide releases from a small‐scale pipeline

A Damage Mechanics based Evaluation of Dynamic Fracture Resistance in Gas Pipelines

Burst Pressure Prediction of Subsea Supercritical CO2 Pipelines

Phase-field method of crack branching during SC-CO2 fracturing: A new energy release rate criterion coupling pore pressure gradient

Analysis of Dynamic Fracture Mechanisms in Gas Pipelines

Experiment on the medium volume fraction distribution and hazardous area in the case of CO2pipeline leakage

A full three‐dimensional fracture propagation model for supercritical carbon dioxide fracturing

Mechanism of fracture propagation for SC-CO2 fracturing and phase-change process

Fracture response of 1422-mm diameter pipe with double-V groove weld joints and circumferential crack in fusion line

Dynamic Ductile Fracture Toughness Test and Numerical Simulation for Ultra-High Pressure Gas Pipelines

The Study on Crack Dynamic Propagation in the Rich Gas Transmission Pipelines

Fracture failure risk analysis of pressure pipeline containing defects on pile foundation settlement

Fracture mechanics analysis of gas pipeline with circumferential crack under the action of transverse landslide

Effects of corrosion defect and tensile load on injection pipe burst in CO2 flooding