Abstract:PLL frequency synthesizers with low jitter are essential for mm-Wave high-speed wireless communication systems and data converters. By doing away with the frequency doubler, low jitter synthesizers with the 2 ND harmonic output can simplify their architecture. Additionally, to produce high-quality local oscillator signals for 2ND harmonic output, it is beneficial to suppress the fundamental frequency component at 2 ND harmonic output. In general, lowering the voltagecontrolled oscillator's phase noise (PN) and reducing the PLL's bandwidth to suppress in-band noise are the two most popular ways to minimize PN of PLL. The phase noise of N-core VCO reduce PN by 10logN, which is an effective method for obtaining low PN. Additionally, increasing the reference clock frequency hence decreasing the loop frequency division ratio can decrease PN. Literature [1] used a reference clock frequency of 500MHz with 175mW to implement the PLL of 52-fs <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rms</inf> Jitter. Ref. [2] adopted a folded transformer-based series resonance CMOS VCO, the PN of which achieved -130.8dBc/Hz@1MHz, consumed 242mW while reducing the core area. Ref. [3] uses a clock frequency of 250MHz to reduce the overall contribution of VCO through wideband PLL, while suppressing the noise introduced by the reference clock through the design of double-sampling phase detector (SPD). Ref. [4] uses the high gain of phase-frequency detector (PFD) with time amplification to suppress the gain of CP, thus achieving the performance of 60-fs <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rms</inf> Jitter. This study presents the construction of a PLL based on a 4-core resistance-synchronized VCO that achieves 47-fs <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rms</inf> Jitter and produces 2 ND harmonic with fundamental frequency suppression.

INVITED PAPER: A 4.5-5.4GHz Digital Bang-Bang PLL for Cryogenic Applications.

A Low Phase Noise, Wideband and Compact CMOS PLL for Use in a Heterodyne 802.15.3c Transceiver

A 400uw 3.6Ghz-4.6Ghz Low Power Cryogenic CP-PLL with Transformer-Based VCO in 28nm Bulk CMOS

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A 0.8 V Low Power Low Phase-Noise Pll

A 1-1.7 GHz Cryogenic Fractional-N CP-PLL for Quantum Computing Applications.

A 40 Ghz 65 Nm Cmos Phase-Locked Loop with Optimized Shunt-Peaked Buffer

A Low Phase Noise V-Band 40 Nm Cmos Phase Locked Loop For Wireless Communication

A 4.7ghz Synchronized-Multi-Reference PLL with In-Band Phase Noise Lower Than Reference Phase $\text{noise +20}\Text{logn}_{\mathrm{d}\mathrm{i}\mathrm{v}}$

A 0.6V 50-to-145mhz PVT Tolerant Digital PLL with DCO-dedicated ΔΣ LDO and Temperature Compensation Circuits in 65nm CMOS

An 11.1-to-14.9ghz Digital-Integral Hybrid-Proportional Fractional-N PLL with an LC DTC Achieving 0.52μs Locking Time and 41.3f5 Jitter

A 29.5 to 31.7 GHz PLL in 65 Nm CMOS Technology

A 47K Noise Temperature CMOS S-band LNA for Cryogenic Applications

A 3.5K 4-6 GHz RF-DAC for Cryogenic Quantum Applications in 28-Nm Bulk CMOS

A 24ghz Low Power and Low Phase Noise PLL Frequency Synthesizer with Constant KVCO for 60ghz Wireless Applications

A 58.3-to-65.4 GHz 34.2 Mw Sub-Harmonically Injection-Locked PLL with a Sub-Sampling Phase Detection

A 2.1-GHz PLL with -80dBc/-74dBc reference spur based on aperture-phase detector and phase-to-analog converter

A 4.8-GHz Time-Interleaved Multi-Reference PLL with 16.1-fs Jitter

IEEE ASSCC 2023/ Session 10/ Paper 10.5.

A Low-Power Digital Design of All Digital PLL for 2.4G Wireless Communication Applications.

A 4224 MHz Low Jitter Phase-Locked Loop in 0.13-Μm CMOS Technology