Abstract:PLL frequency synthesizers with low jitter are essential for mm-Wave high-speed wireless communication systems and data converters. By doing away with the frequency doubler, low jitter synthesizers with the 2 ND harmonic output can simplify their architecture. Additionally, to produce high-quality local oscillator signals for 2ND harmonic output, it is beneficial to suppress the fundamental frequency component at 2 ND harmonic output. In general, lowering the voltagecontrolled oscillator's phase noise (PN) and reducing the PLL's bandwidth to suppress in-band noise are the two most popular ways to minimize PN of PLL. The phase noise of N-core VCO reduce PN by 10logN, which is an effective method for obtaining low PN. Additionally, increasing the reference clock frequency hence decreasing the loop frequency division ratio can decrease PN. Literature [1] used a reference clock frequency of 500MHz with 175mW to implement the PLL of 52-fs <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rms</inf> Jitter. Ref. [2] adopted a folded transformer-based series resonance CMOS VCO, the PN of which achieved -130.8dBc/Hz@1MHz, consumed 242mW while reducing the core area. Ref. [3] uses a clock frequency of 250MHz to reduce the overall contribution of VCO through wideband PLL, while suppressing the noise introduced by the reference clock through the design of double-sampling phase detector (SPD). Ref. [4] uses the high gain of phase-frequency detector (PFD) with time amplification to suppress the gain of CP, thus achieving the performance of 60-fs <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rms</inf> Jitter. This study presents the construction of a PLL based on a 4-core resistance-synchronized VCO that achieves 47-fs <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">rms</inf> Jitter and produces 2 ND harmonic with fundamental frequency suppression.

A 24ghz Low Power and Low Phase Noise PLL Frequency Synthesizer with Constant KVCO for 60ghz Wireless Applications

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A Low Phase Noise V-Band 40 Nm Cmos Phase Locked Loop For Wireless Communication

A Low Power Sub-GHz PLL with Optimized LO Distribution Circuit

A Low Phase Noise, Wideband and Compact CMOS PLL for Use in a Heterodyne 802.15.3c Transceiver

A 0.8 V Low Power Low Phase-Noise Pll

A K-Band Fractional-N Frequency Synthesizer with a Low Phase Noise LC VCO in 90nm CMOS.

An Improved Low Phase Noise LC-VCO with Wide Frequency Tuning Range Used in CPPLL

A Fully-Differential Phase-Locked Loop Frequency Synthesizer for 60-Ghz Wireless Communication

A 56-To-66 Ghz Quadrature Phase-Locked Loop With A Wide Locking Range Divider Chain In 65nm Cmos

A 3.45&#x2013;4.22 GHz PLL Frequency Synthesizer with Constant Loop Bandwidth for WLAN Applications

A 68.1-to-73.8ghz E-band Low Phase Noise QPLL with Amplifier Feedback QVCO in 65-Nm CMOS

A 0.8–4.2 GHz Monolithic All-Digital PLL Based Frequency Synthesizer for Wireless Communications

A 24-GHz fully integrated phase-locked loop for 60-GHz beamforming

A 6.6 mW 1.25-2.25 GHz low phase noise PLL frequency synthesizer based on wide tuning range Class-C VCO.

A Low-Power Low-Noise mm-Wave Subsampling PLL Using Dual-Step-Mixing ILFD and Tail-Coupling Quadrature Injection-Locked Oscillator for IEEE 802.11ad

A Low Spur, Low Jitter 10-Ghz Phase-Locked Loop in 0.13-Μm CMOS Technology

A 66-to-76ghz E-band QPLL with Amplifier Feedback QVCO in 65-Nm CMOS

A Low-Phase-Noise 8 GHz Linear-Band Sub-Millimeter-Wave Phase-Locked Loop in 22 nm FD-SOI CMOS

IEEE ASSCC 2023/ Session 10/ Paper 10.5.

A 1.5–1.9GHz phase-locked loop (PLL) frequency synthesizer with AFC and Σ-Δ modulator for Sub-GHz wireless transceiver