Abstract:Prefabricated construction technology has the advantages of high quality, high efficiency, low cost, energy saving and environmental protection, and has developed rapidly in China in recent years. Based on the design and construction concept of “equivalent to cast-in-site”, the seismic effect and strong earthquake damage mechanism of the overall structure considering boundary constraints are studied. In order to promote the application and development of high-assembly-rate concrete shear wall structures in high-intensity areas, a reduced-scale structural model of sleeve connection was designed and fabricated based on the Chinese seismic code. Through the multi-level strength-increasing shaking table simulation test, the dynamic characteristics, earthquake response, failure process and strong earthquake disaster mechanism of the model structure are comprehensively analyzed. The research results show that the prefabricated concrete shear wall structure can achieve the predetermined seismic fortification purpose according to the specified construction requirements. Secondly, Under the stepwise excitations of PGA 0.035–0.40 g, the flexural and shear failure of the coupling beam are the main failure mode, and the damage of the coupling beam with a small span-height ratio (1.33) is more serious. Furthermore, Under the stepwise excitations of PGA 0.62–0.90 g, the seismic capacity of the model structure is greatly reduced and there is a risk of collapse. The failure modes of the structure after a strong earthquake include four types: bending-shear composite failure of composite beams, horizontal interface penetration between composite beams and floor slabs, horizontal interface penetration between prefabricated walls and floor slabs, and vertical cracking at the junction surface of prefabricated walls and cast-in-site restraint elements. The latter three are unique forms of fabricated concrete shear wall structures. Finally, according to the whole process data of the test, the bottom shear force and top displacement of the model structure are calculated, and the hysteresis curve, skeleton curve and equivalent lateral stiffness are established. It is hoped that this study can provide a reference for the seismic design of high-rise fabricated concrete shear wall structures.

Shaking table tests and numerical simulation for brick masonry structure reinforced with polypropylene mesh cement mortar coating

Seismic Behavior of the Brick Masonry Rural Building Strengthened with Polypropylene Grid Cement Mortar Coating: Shaking Table Tests

In-Plane Strengthening Effect of Prefabricated Concrete Walls on Masonry Structures: Shaking Table Test

Augmenting the seismic performance of unreinforced masonry loess - Cave with composite materials through shaking table testing

Experimental Seismic Response of a Damaged Brick Cave Dwelling Repaired Using a Cement Mortar Coating with Polypropylene Packing Strap Mesh

Experimental study on the seismic performance of masonry wall reinforced by cement mortar and polypropylene band

EXPERIMENT AND NONLINEAR STATIC ANALYSIS OF BRICK MASONRY WALL STRENGTHENED WITH STRAND MESH REINFORCING POLYMER MORTAR OVERLAY

Dynamic Properties and Seismic Responses of the Masonry Structure Model Strengthened with BFRP Laminates

Nonlinear Static Analysis On Masonry Wall Strengthened With Reinforced Mortar Overlay

Experimental study on existing brick walls strengthened with high-strength steel wire mesh and polymer mortar

Theoretical analysis and shaking table tests of old masonry structure reinforced by external frames with added stories on the top using seismic isolation technology

Experimental Study on Strengthening Brick Walls of Low Strength with High Strength Steel Wire and Polymer Mortar

Shaking table test of fabricated concrete shear wall structure and study on damage mechanism of strong earthquake

Shake table test on a five-story residential masonry building strengthened by engineered cementitious composites based on minimum disturbance

Earthquake resistant behavior on seismic strengthening of typical rural brick-wood structure in Beijing

Experimental Study on Low Strength Brick Masonry Wall Strengthened with Self-compacting Concrete Wall

3D meso‐scale numerical model and dynamic mechanical behavior of reinforced concrete

Experimental research on the shear behavior of brick walls reinforced with dry-connected steel plate frames

Analysis and Shaking Table Experimental Study on Seismic Shear Capacity of Rowlock Cavity Wall

Research on Shaking Table Test of Masonry Building with Rowlock Cavity Walls

Experimental Study on Seismic Performance of Brick-Concrete Masonry School Buildings with Wall Piers Reinforced with Anchored Reinforcements