Abstract:Radio frequency (RF)-induced heating associated with medical implants is a critical concern when performing a magnetic resonance imaging (MRI) scan. The purpose of this study is to construct a “digital twin” of RF coil integrated in an MRI scanner by <inline-formula> <tex-math notation="LaTeX">$B_{1}^{+}$ </tex-math></inline-formula> map matching, reproducing the physical electromagnetic (EM) field, allowing it to be a qualified test environment for heating evaluations. <inline-formula> <tex-math notation="LaTeX">$B_{1}^{+}$ </tex-math></inline-formula> map inside an American Society for Testing Material (ASTM) phantom with various positions was used to characterize the physical EM field. A loaded tuned two-port birdcage body coil model was established to generate the numerical EM field and optimized to minimize the difference between the measured and simulated fields, which was quantified by “mean symmetric mean absolute percentage error” (mSMAPE). The amplitude of the simulated field was normalized to MR sequence labeling. Finally, the average specific absorption rate (SAR) inside the ASTM phantom was measured in a calorimetry experiment and compared to simulation one heated by the pre-established coil. A heating experiment was performed on an insulated cable to further validate the established test environment. The impact of excitation parameters and the port location was investigated. mSMAPE of the optimized field was less than 10%. The difference between the simulated and measured average SAR was 8.5%. <inline-formula> <tex-math notation="LaTeX">$R^{2}$ </tex-math></inline-formula> for the linear regression of the temperature rise and predicted power deposition using the optimized field was 0.993. The digital twin was successfully constructed and verified a sufficiently accurate description of the physical field. The established construction method of the digital twin provides a handy choice for building RF test environment and may create more possibilities for the development of this area.

An Extended Theory and Method for Double-Tuned Conformal Birdcage Coil in MRI

Deformation-Space Method For The Design Of Biplanar Transverse Gradient Coils In Open Mri Systems

Accurate Evaluation of RF Coil-Tissue Interactions Using a Hybrid FDTD-MoM Method

MRI Coil Design Using Boundary-Element Method with Regularization Technique: A Numerical Calculation Study

An Asymmetric Birdcage Coil Design for <sup>19</sup>F Lung MR Imaging at 1.5 T

Design and simulation of the radio-frequency coils of magnetic resonance imaging

Dual-Channel Transverse Fields Radiofrequency Coils for 1.5 T Magnetic Resonance Imaging

Shim Coil Set for an Open Biplanar Mri System Using an Inverse Boundary Element Method

Recent Progress in Birdcage RF Coil Technology for MRI System

Coupled stack-up volume RF coils for low-field open MR imaging

Constructing a Digital Twin of the Birdcage Coil in an MR Scanner by Map Matching: For Radio Frequency Heating Evaluation of Implantable Medical Devices

Proton/Deuterium Magnetic Resonance Imaging of Rodents at 9.4T Using Birdcage Coils

Open birdcage coil for head imaging at 7T

A Design Scheme for 1H/31P Dual-Nuclear Parallel MRI Coil

Study on the Effect of Non-Symmetrical Current Distribution Controlled by Capacitor Placement in Radio-Frequency Coils for 7T MRI

MRI Birdcage Coil for Non-Invasive Marine Products Sensing at 1.5 T

Coupled stack-up volume RF coils for low-field MR imaging

A hybrid FDTD/MoM algorithm with a conformal Huygens' equivalent surface for MRI RF coil design and analysis

An Optimized Quadrature RF Receive Coil for Very-Low-field (50.4 Mt) Magnetic Resonance Brain Imaging.

Numerical Simulation and Evaluation of a Four-Channel-by-Four-Channel Double-Nuclear RF Coil for 1H MRI and 31P MRSI at 7 T

RF coil that minimizes electronic components while enhancing performance for rodent MRI at 7 Tesla