Abstract:In the design of high-speed low-power electrical generators for unmanned aircraft and spacecraft, maximization of specific output (power/weight) is of prime importance. Several magnetic circuit configurations (radial-field, axial-field, flux-squeezing, homopolar) have been proposed, and in this paper the relative merits of these configurations are subjected to a quantitative investigation over the speed range 10 000-100 000 rev/min and power range 250 W-10 kW. The advantages of incorporating new high energy-density magnetic materials are described. Part 1 deals with establishing an equivalent circuit for permanent-magnet generators. For each configuration the equivalent circuit parameters are related to the physical dimensions of the generator components and an optimization procedure produces a minimum volume design at discrete output powers and operating speeds. The technique is illustrated by a quantitative comparison of the specific outputs of conventional radial-field generators with samarium cobalt and alnico magnets. In Part II the specific outputs of conventional, flux-squeezing, and claw-rotor magnetic circuit configurations are compared. The flux-squeezing configuration is shown to produce the highest specifilc output for small sizes whereas the conventional configuration is best at large sizes. For all sizes the claw-rotor configuration is significantly inferior. In Part I1l the power densities available from axial-field and flux-switching magnetic circuit configurations are maximized, over the power range 0.25-10 kW and speed range 10 000-100 000 rpm, and compared to the results of Parts I & II. For the axial-field configuration the power density is always less than that of the conventional and flux-squeezing radial-field configurations.

Influence of Rotor Topology on the Performance of Permanent Magnet Starter-Generators

Optimum Magnetic Circuit Configurations for Permanent Magnet Aerospace Generators

Multidisciplinary Design and Optimization of High-Speed Hybrid Excitation Starter Generator for Aircraft Power System

A High‐efficiency Magnetic‐geared Double‐rotor Machine with the Coreless Stator for Hybrid Aircraft Propulsion

Research on a Novel Hybrid Axial Transverse Flux Permanent Magnet Motor with Compound Rotor

Control Design for PMM-based Starter Generator System for More Electric Aircraft

Influence of magnets magnetization direction on the performance of high-speed permanent magnet synchronous starter-generator for micro-gas turbine

A Novel Axial-Flux Permanent Magnet Vernier Machine with H-Core Stator Modules and Toroidal Windings for Electric Aircraft Propulsion System

High-Power Machines and Starter-Generator Topologies for More Electric Aircraft: A Technology Outlook

Performance Analysis of Double-Stator Starter Generator for the Hybrid Electric Vehicle

Design of a Dual-Stator Superconducting Permanent Magnet Wind Power Generator with Different Rotor Configuration

A Permanent Magnet Integrated Starter Generator for Electric Vehicle Onboard Range Extender Application

Aircraft Starter-Generator System Based on Permanent-Magnet Machine Fed by Active Front-End Rectifier

Design of the double-stator permanent magnet synchronous starter and generator used in electric vehicles

A Brushless Hybrid Excited Starter-Generator with Independent Excitation Flux Circuit for Aircraft AC Power Generation

Design and Analysis of a Multiple-Torque Components Dual Rotor Axial Flux Permanent Magnet Vernier Machine for Aviation Propulsion Applications

The Performance Research of Starter-Generator Based on Reluctance Torque Used in HEV

Stability Assessment of a High Speed Permanent Magnet Machine Based Aircraft Electrical Power System

Influence of Driving Voltage on Starting Performance of High-Speed Permanent Magnet Synchronous Starter–Generator for Micro-gas Turbine

Impedance and Stability Analysis of a Permanent Magnet Synchronous Generator System for More Electric Aircraft

Speed/Torque Ripple Reduction of High-Speed Permanent Magnet Starters/Generators With Low Inductance for More Electric Aircraft Applications