Abstract:Due to the larger diameter of effective air-gap for torque production, outer-rotor permanent magnet (PM) machines exhibit the distinctive advantages, such as high torque density and large rotor inertia. This article presents a compact outer-rotor permanent magnet starter/generator (OR-PM S/G) to match diesel engine for extended-range hybrid electric vehicle. In order to solve the serious temperature rise problem resulting from the copper losses under constrained slot space in the inner stator, a new winding indirect liquid cooling technique by inserting heat pipes in the center of slots is proposed. It facilitates a path from the center of the coils to the cooling medium with a higher thermal conductivity, thus increasing the tolerable current density of coils. By optimizing the geometry and dimensions of heat pipe and coil, the temperature rise in slots are achieved within an acceptable limit according to the computed results of FEA and computational fluid dynamics (CFD). In order to validate the cooling design, a 30kW OR-PM S/G prototype with rectangular-shaped PM and the proposed indirect liquid cooling windings is manufactured and experimented. The power capability and efficiency of the proposed OR-PMS/G are validated by the measured results with calculation results. A good agreement between the predicted and measured temperatures indicates the validity of indirect cooling method for concentrated winding with heat pipe.

A Permanent Magnet Integrated Starter Generator for Electric Vehicle Onboard Range Extender Application

Optimization Design of a Permanent Magnet Synchronous Generator for a Potential Energy Recovery System

Comparison of PMSMs with Different Rotor Structures for EV Application

Design and Analysis of a New Outer‐rotor Permanent‐magnet Flux‐switching Machine for Electric Vehicle Propulsion

Permanent-Magnet Flux-Switching Integrated Starter Generator with Different Rotor Configurations for Cogging Torque and Torque Ripple Mitigations

Design and Analysis of a Novel Flux-Switching Permanent Magnet Integrated-Starter-Generator

New Proposal of 80-Krpm High-Speed Surface-Mounted Permanent-Magnet Synchronous Motor

Optimum Design of an Extended Range Generator for EVs Based on Taguchi Method

Design Optimization with Outer Rotor Interior Permanent Magnet Synchronous Motor with Hybird Permanent Magnet

Windings Indirect Liquid Cooling Method for a Compact Outer-Rotor PM Starter/Generator With Concentrated Windings

Loss and Thermal Analysis of a High-Power-Density Permanent Magnet Starter/Generator

Cogging Torque Suppression in A Permanent-Magnet Flux-Switching Integrated-Starter-Generator

Design and Analysis of Outer Rotor Permanent-Magnet Vernier Machines with Overhang Structure for In-Wheel Direct-Drive Application

Design and Analysis of a Novel Dual-PM Flux Reversal Machine for Electric Vehicle Propulsion

Optimal Design of an Interior Permanent Magnet Synchronous Motor for Electrical Vehicle Applications

Design Consideration of Fractional Slot Concentrated Winding Interior Permanent Magnet Synchronous Motor for EV and HEV Applications

Design of a 35 kW Permanent Magnet Synchronous Motor for Electric Vehicle Equipped With Non-Uniform Air Gap Rotor

Design and Analysis of a Stator Field Control Permanent Magnet Synchronous Starter–Generator System

A Novel Outer-Rotor Permanent-Magnet Flux-Switching Machine for Urban Electric Vehicle Propulsion

Experiment and Analysis of High Power Line-Start Pm Motor

Design and Analysis of a Novel Integrated Starter-Generator Based on Brush DC Motor