Abstract:An integrated-starter-generator (ISG) system provides a cheap hybrid power strategy for hybrid electric vehicles (HEV). 12-10 flux switching integrated-starter-generator (FSISG) is one type of ISG machine, which employs the flux switching topological structure to improve the performance. In this paper, a prototype of 12-10 FSISG with the improved structure, which was employed to improve the manufacturability, was analyzed and studied. Through numerical studies, the influences of the improved structure and the characteristics of 12-10 FSISG were revealed. According to finite element analysis (FEA) results, the output voltage of FSISG can be considered as sinusoidal voltage. The results of the output torque show that the excitation current density of FSISG should be limited to less than 9 A/mm(2) to avoid serious magnetic saturation. Next, the experimental tests of the prototype were carried out on the testing platform. In generating mode, the experiment results indicate that FSISG can output electrical energy with high efficiency in wide speed and torque ranges. In starting mode, the maximum starting torque of the prototype is 10.5 Nm. During the starting procedure, the prototype reaches a steady state rapidly. In the variable load conditions, it shows a rapid response ability to the changes of loads. According to the experiment results in this paper, the 12-10 FSISG has shown a promising performance for HEV application in both generating mode and starting mode.

Design and Analysis of a Novel Flux-Switching Permanent Magnet Integrated-Starter-Generator

Novel Modular-Rotor Switched-Flux Permanent Magnet Machines

Cogging Torque Suppression in A Permanent-Magnet Flux-Switching Integrated-Starter-Generator

Design and Analysis of a Novel Dual-PM Flux Reversal Machine for Electric Vehicle Propulsion

Permanent-Magnet Flux-Switching Integrated Starter Generator with Different Rotor Configurations for Cogging Torque and Torque Ripple Mitigations

A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine with Armature Windings Wound on Both Stator Poles and Rotor Teeth

Design and Performance Investigation of Novel Linear Switched Flux PM Machines

Study on the 12-10 flux switching integrated-starter-generator for hybrid electric vehicle application

Hybrid Switched Reluctance Integrated Starter And Generator

Design and Analysis of a Novel Integrated Starter-Generator Based on Brush DC Motor

A Novel Permanent-Magnet Flux Switching Machine with an Outer-Rotor Configuration for In-Wheel Light Traction Applications

Design and Analysis of a Doubly Salient Wound Field Starter Generator for Cost-Effective Automobile Application

Permanent magnet flux switching machines — Topologies, analysis and optimization

A Novel Outer-Rotor Permanent-Magnet Flux-Switching Machine for Urban Electric Vehicle Propulsion

Design and Analysis of a New Outer‐rotor Permanent‐magnet Flux‐switching Machine for Electric Vehicle Propulsion

Design of the double-stator permanent magnet synchronous starter and generator used in electric vehicles

Control Integrated Studies on High Speed Permanent Magnetic Generators System

The Numerical Analysis and Experimental Study of Flux Switching Motor/Generator in HEV Applications

A Permanent Magnet Integrated Starter Generator for Electric Vehicle Onboard Range Extender Application

A Novel Single-Phase Flux-Switching Permanent Magnet Linear Generator Used for Free-Piston Stirling Engine

Design and Analysis of a Stator Field Control Permanent Magnet Synchronous Starter–Generator System