Abstract:Torque ripple reduction by harmonic current injection for permanent magnet synchronous machine (PMSM) drives has been widely investigated. The existing research can be briefly divided into feedforward-based methods and feedback-based methods. Feedforward-based methods require torque ripple model and machine parameters, so that the performance of those methods is limited due to the accuracy of the model itself and machine parameters. Feedback-based-methods are presented to improve the performance of torque ripple reduction, which are mostly based on speed harmonics caused by the corresponding torque ripples, while the speed operation range of feedback-based-methods is limited due to the fact that speed harmonics will be filtered by the inertia of the drive systems at high speeds. Therefore, it is required to propose one torque ripple reduction method without machine parameters, which also avoids the limitation of the speed operation. In this paper, a novel feedback-based torque ripple reduction method for PMSM drives is proposed, wherein quadrature magnitudes of tangential vibration acceleration of the stator are measured and regulated by the model-free adaptive controller (MFAC) for torque ripple reduction, since the tangential force that generates torque ripples will also act on the stator and generate tangential vibration. The proposed controller can generate optimal harmonic current references without speed limitations and any machine parameters. The proposed method is evaluated by experiments and is verified to reduce torque ripples of PMSM drives effectively.

Speed/Torque Ripple Reduction of High-Speed Permanent Magnet Starters/Generators With Low Inductance for More Electric Aircraft Applications

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Torque Ripple Reduction of a Salient-Pole Permanent Magnet Synchronous Machine with an Advanced Step-Skewed Rotor Design.

Torque Ripple Suppression Method with Reduced Switching Frequency for Open-Winding PMSM Drives with Common DC Bus.

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

Cogging Torque Suppression in A Permanent-Magnet Flux-Switching Integrated-Starter-Generator

Permanent-Magnet Flux-Switching Integrated Starter Generator with Different Rotor Configurations for Cogging Torque and Torque Ripple Mitigations

Torque ripple analysis and reduction of permanent magnet synchronous motor

DC Voltage Control of a Wide-Speed-Range Permanent-Magnet Synchronous Generator System for More Electric Aircraft Applications

Reduction of Low-Frequency Noise and Vibration for Low-Speed High-Torque Permanent Magnet Synchronous Machines

Optimization and Analysis of a High Power Density and Fault Tolerant Starter–Generator for Aircraft Application

Torque Ripple Suppression Based on Optimal Harmonic Current Injection in Dual Three-Phase PMSMs under Magnetic Saturation.

Research on Cogging Torque Reduction of Direct-Drive Type Dual-Rotor Radial Flux Permanent Magnet Synchronous Motor for Electric Propulsion Aircraft

A New Method to Reduce the Periodic Speed Ripples of Air-Conditioners in Low Speed Range

Torque Ripple Reduction of Permanent Magnet Synchronous Machine Drives with Tangential Vibration Acceleration Control

Aircraft Starter-Generator System Based on Permanent-Magnet Machine Fed by Active Front-End Rectifier

Improved Speed Extension for Permanent Magnet Synchronous Generators by Means of Winding Reconfiguration

Ripple Reduction of Electromagnetic Supporting Force in Aerodynamic Bearing-Equipped SPMSM

Torque Ripple Suppression of Flux-Switching Permanent Magnet Machine Based on General Air-gap Field Modulation Theory

Impedance and Stability Analysis of a Permanent Magnet Synchronous Generator System for More Electric Aircraft