Abstract:The micro-electro-mechanical system (MEMS) resonator developed based on surface processing technology usually changes the section shape either due to excessive etching or insufficient etching. In this paper, a section parameter is proposed to describe the microbeam changes in the upper and lower sections. The effect of section change on the mechanical properties is studied analytically and verified through numerical and finite element solutions. A doubly-clamped microbeam-based resonator, which is actuated by an electrode on one side, is investigated. The higher-order model is derived without neglecting the effects of neutral plane stretching and electrostatic nonlinearity. Further, the Galerkin method and Newton⁻Cotes method are used to reduce the complexity and order of the derived model. First of all, the influence of microbeam shape and gap variation on the static pull-in are studied. Then, the dynamic analysis of the system is investigated. The method of multiple scales (MMS) is applied to determine the response of the system for small amplitude vibrations. The relationship between the microbeam shape and the frequency response is discussed. Results show that the change of section and gap distance can make the vibration soften, harden, and so on. Furthermore, when the amplitude of vibration is large, the frequency response softening effect is weakened by the MMS. If the nonlinearity shows hardening-type behavior at the beginning, with the increase of the amplitude, the frequency response will shift from hardening to softening behavior. The large amplitude in-well motions are studied to investigate the transitions between hardening and softening behaviors. Finally, the finite element analysis using COMSOL software (COMSOL Inc., Stockholm, Sweden) is carried out to verify the theoretical results, and the two results are very close to each other in the stable region.

Dual-jump Amplification in an Electric-Thermal Adjusted Arch Beam Micro-Resonator

A New Type of MEMS Accelerometer with Up-Tuning Structure

Parametric Amplification of Acoustically Actuated Micro Beams Using Fringing Electrostatic Fields

A Highly Sensitive Biaxial Resonant Accelerometer with Two-Stage Microleverage Mechanisms

A New Analytical Model of Single-Stage Microleverage Mechanism in Resonant Accelerometer

Calculation and Improvement on Amplification Effect of MEMS Leverage Mechanism

Parametrically Excited Electrostatic MEMS Cantilever Beam With Flexible Support

An Arch-Linear Composed Beam Piezoelectric Energy Harvester with Magnetic Coupling: Design, Modeling and Dynamic Analysis

Mechanical Behaviors Research and the Structural Design of a Bipolar Electrostatic Actuation Microbeam Resonator

A Mems Piezoelectric In-Plane Resonant Accelerometer With Two-Stage Micro-Leverage Mechanism

Noise matching and sensitivity improvement in aluminum nitride nanoelectromechanical resonators via parametric amplification

Improvement of a Micro-Beam in a Smart Gas Sensor with Resonating Mechanism

Nonlinearity-mediated digitization and amplification in electromechanical phonon-cavity systems

Micromechanically-coupled resonated system for synchronized oscillation with improved phase noise

Significant tuning of internal mode coupling in doubly clamped MEMS beam resonators by thermal effect

Enhancement of Synchronization Bandwidth in an Arch Beam

Thermal tuning of mechanical nonlinearity in GaAs doubly-clamped MEMS beam resonators

Static and Dynamic Mechanical Behaviors of Electrostatic MEMS Resonator with Surface Processing Error

Static and Dynamic Analysis of Electrostatically Actuated MEMS Shallow Arches for Various Air-Gap Configurations

Giant Enhancement in the Thermal Responsivity of Microelectromechanical Resonators by Internal Mode Coupling

Amplitude Deflection in a Nonlinear MEMS Resonator under Parametric Excitation