Abstract:Acoustic black hole (ABH) structures hold great promise for numerous engineering applications. Stemming from a power-lawed thickness decrease, bending waves are slowed down to produce wave compression and energy concentration, conducive to vibration/sound radiation control and energy harvesting. However, in existing linear studies, the ABH effect shows a deficiency at low frequencies, typically below the so-called cut-on frequency. In this paper, mechanical nonlinearity is introduced into a cantilever ABH beam to enhance the low-frequency ABH effect through low-to-high frequency energy transfer. Using a grounded cable with cubic stiffness, the sweeping results (with excitation frequency below the cut-on frequency) show that the displacement of the low-order modes of the nonlinear ABH beam decreases while the amplitude of its high-order harmonics increases compared to that of its linear counterpart, indicating a significant energy transfer phenomenon enabled by the cable in the nonlinear system. Due to the inherent ABH effect at high frequencies, the damped nonlinear ABH beam absorbs the transferred energy to result in a reduction of the vibration amplitude. To quantify the ABH effect under nonlinear conditions, the damping loss factor of the system is evaluated from energy viewpoint alongside the harmonic balance method. Below the cut-on frequency, the damping loss factor of some dominant modes in the ABH beam is drastically increased, indicating an enhanced ABH effect. This is also confirmed by the time response in the free decay test. Experiments demonstrate the energy transfer phenomenon and the efficient damping effect achieved in the nonlinear system.

Enhancement of Synchronization Bandwidth in an Arch Beam

Nonlinearity-Induced Asymmetric Synchronization Region in Micromechanical Oscillators

A Straight-Arch-straight Beam Tandem Quasi-Zero Stiffness Structure

Phase-delay Induced Variation of Synchronization Bandwidth and Frequency Stability in a Micromechanical Oscillator

Locally Resonant Band Gaps in Flexural Vibrations of A Timoshenko Beam with Periodically Attached Multioscillators

Method to Improve Beam Quality by Compensating Spherical Aberrations in Master Oscillator Power Amplifier Laser Systems

Synchronization bandwidth enhancement induced by a parametrically excited oscillator

Effects of Phase Delay on Synchronization in a Nonlinear Micromechanical Oscillator

Synchronization Process Expediting in Nonlinear Oscillators Via Reconfiguration of the Potential Well Pattern

FREQUENCY STABILITY OF MICROMECHANICAL BEAM OSCILLATOR UNDER SUBHARMONIC SYNCHRONIZATION

Anomalous Amplitude-Frequency Dependence in a Micromechanical Resonator under Synchronization

Slip-oscillate response in a synchronizing nonlinear micro-resonator

Effects of dynamical and structural modifications on synchronization.

The coupling dynamic characteristics and vibration suppression of a double-beam structure with two linear oscillators installed separately

Analysis of Synchronization in the Varying-Period Slow-Wave Structures

Frequency Stability Improvement for Piezoresistive Micromechanical Oscillators Via Synchronization

Nonlinear Coupled Vibration of an Arch-Beam Structural System

Mutual cancellation phenomenon of the nonlinearities in micro-machined double-clamped beams resonator

Micromechanically-coupled resonated system for synchronized oscillation with improved phase noise

Programmable Synchronization Enhanced MEMS Resonant Accelerometer

Energy transfer for enhanced acoustic black hole effect through a cable-induced mechanical nonlinearity