Abstract:In the field of advanced packaging, large-size silicon wafers are usually thinned by ultra-precision grinding technology relying on the process of workpiece self-rotation. However, the damage caused by mechanical material removal deteriorates the wafer surface flatness and die strength, while its atomic-scale formation principle has yet to be revealed. This work explores the ductile deformation and subsurface damage evolution mechanism of silicon wafer during the ultra-precision grinding process. Some grinding tests are first conducted using different diamond wheels. The surface topography and energy dispersive spectroscopy (EDS) mapping of ground wafers are measured by scanning electron microscope (SEM). The phase transition properties of the ground silicon wafer are confirmed via Raman spectrum. Next, the specimen of groove cross-section is fabricated and its morphology is examined via transmission electron microscopy (TEM) to analyze the subsurface damage characteristics. The subsurface defects at the atomic scale, involving amorphous layer, dislocations, stacking faults and lattice distortions, are observed. Due to its controllable load and similarity of the cutting motion, nanoscratch is utilized for investigating the influence of abrasive interactions on subsurface deformation during the grinding process. Thus, a series of multiple nanoscratch tests are performed in both varied and constant force modes. The material removal behaviors under different scratching conditions are illustrated. This work provides a fundamental understanding of developing a high-efficiency and low-damage thinning method for 12-inch silicon wafers.

Damage Evolution and Plastic Deformation Mechanism of Passivation Layer During Shear Rheological Polishing of Polycrystalline Tungsten

The influence of pH and H2O2 on surface quality and material removal rate during W-CMP

Effects of pH Values and H2O2 Concentrations on the Chemical Enhanced Shear Dilatancy Polishing of Tungsten

A comprehensive study on electrochemical polishing of tungsten

Synergetic Effect of Chemical Components in a Tungsten CMP Slurry and the Evolution of Tungsten Surface Species

Mechanism of material removal in tungsten carbide-cobalt alloy during chemistry enhanced shear thickening polishing

Impact of Film Morphology on Chemical Mechanical Polishing of Tungsten

Theoretical and experimental investigation of chemical mechanical polishing of W–Ni–Fe alloy

Study on grain removal characteristics and influencing factors of polycrystalline tungsten during polishing process

Ductile deformation and subsurface damage evolution mechanism of silicon wafer induced by ultra-precision grinding process

Investigation Of Tungsten Rich Residue Defects Induced By Electron Beam Inspection Post Contact Tungsten Chemical And Mechanical Polish

Corrosion and Microstructure Evolution of He+ Plasma Irradiated Tungsten PFMs

Electrolyte Composition and Removal Mechanism of Cu Electrochemical Mechanical Polishing

Corrosion and Microstructure Evolution of He+ Irradiated Tungsten Pfms

An efficient electrochemical polishing of tungsten with combined forced and natural convections

Mechanism study of electropolishing from the perspective of etching isotropy

Effect of nanosilica abrasive properties on tungsten chemical mechanical planarization

Roughness Control in the Processing of 2-Inch Polycrystalline Diamond Films on 4H-Sic Wafers

Tribological behavior of nanostructured WC particles/polymer coatings

In-depth molecular dynamics analysis of crack evolution in polycrystalline chromium under uniaxial tensile deformation

Atomistic scale nanoscratching behavior of monocrystalline Cu influenced by water film in CMP process