Abstract:Ultra-precision thinning technology using workpiece self-rotational grinding followed by chemical mechanical polishing (CMP) is extensively applied in the integrated circuit manufacturing process, which enables to obtain large size ultra-thin silicon wafers with high material removal rate and low damage layer thickness. However, an in-depth understanding of the influence caused by ground surface topography on material removal mechanism in silicon CMP process has not been revealed yet. This work systematically investigates the contact characteristics of the wafer-pad interface and corrosion behaviors of the ground silicon wafer immersed in polishing solution. Firstly, some silicon wafers are ground using different wheels and subsequently polished. The material removal depth during the whole CMP process is measured. Then, the intrinsic model of polishing pad is determined via mechanical property tests. A finite element method is adopted to evaluate the contact status, displacement distortion and stress distribution at the contact region between pad and ground wafer surface. Moreover, the chemical reaction mechanism between ground silicon wafer and polishing solution is revealed by utilizing X-ray photoelectron spectroscopy and electrochemical analysis. The influence of wafer surface topography on corrosion resistance in CMP process is illustrated. Finally, corresponding experimental results are explained from an atomic scale by a ReaxFF reactive molecular dynamics simulation model. This presented study demonstrates the corrosion promotion principle of ground silicon wafer in CMP process.

Theoretical and experimental investigation of chemical mechanical polishing of W–Ni–Fe alloy

Effect of nanosilica abrasive properties on tungsten chemical mechanical planarization

Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy

Study on grain removal characteristics and influencing factors of polycrystalline tungsten during polishing process

Effect of Microstructure Refinement on Surface Morphology and Dynamic Mechanical Properties of W-Cu Alloys

Research on the Chemical Mechanical Polishing Process of Aluminum Alloy Wafers with Acidic Slurry

A Novel Approach of Chemical Mechanical Polishing for a Titanium Alloy Using an Environment-Friendly Slurry

Mechanism of material removal in tungsten carbide-cobalt alloy during chemistry enhanced shear thickening polishing

Novel green chemical mechanical polishing for an aluminum alloy and mechanisms interpreted by molecular dynamics simulations and measurements

Chemical Mechanical Polishing of Aluminum Alloys using Alumina-Based Slurry

Electrochemical magnetorheological finishing for hard-to-machine functional materials with nanometer-scaled surface roughness

A nano-scale mirror-like surface of Ti–6Al–4V attained by chemical mechanical polishing

Nanoscale Planarization Mechanism of Titanium Chemical Mechanical Polishing

Progress in Material Removal Mechanisms of Surface Polishing with Ultra Precision

A comprehensive study on electrochemical polishing of tungsten

Research on Chemical Mechanical Polishing Technology for Zirconium-Based Amorphous Alloys

XPS, UV–vis Spectroscopy and AFM Studies on Removal Mechanisms of Si-face SiC Wafer Chemical Mechanical Polishing (CMP)

Molecular Modeling of the Mechanical Effect in the Chemical Mechanical Polishing Process

Investigation of Material Removal Mechanism of Silicon Wafer in the Chemical Mechanical Polishing Process Using Molecular Dynamics Simulation Method

Mechanical Model of Nanoparticles for Material Removal in Chemical Mechanical Polishing Process

Effects of grinding-induced surface topography on the material removal mechanism of silicon chemical mechanical polishing