Abstract:This study presents a nitrogen-doped microporous carbon nanospheres (N@MCNs) prepared by a facile polymerization–carbonization process using low-cost styrene. The N element in situ introduces polystyrene (PS) nanospheres via emulsion polymerization of styrene with cyanuric chloride as crosslinking agent, and then carbonization obtains N@MCNs. The as-prepared carbon nanospheres possess the complete spherical structure and adjustable nitrogen amount by controlling the relative proportion of tetrachloromethane and cyanuric chloride. The friction performance of N@MCNs as lubricating oil additives was surveyed utilizing the friction experiment of ball-disc structure. The results showed that N@MCNs exhibit superb reduction performance of friction and wear. When the addition of N@MCNs was 0.06 wt%, the friction coefficient of PAO-10 decreased from 0.188 to 0.105, and the wear volume reduced by 94.4%. The width and depth of wear marks of N@MCNs decreased by 49.2% and 94.5%, respectively. The carrying capacity of load was rocketed from 100 to 400 N concurrently. Through the analysis of the lubrication mechanism, the result manifested that the prepared N@MCNs enter clearance of the friction pair, transform the sliding friction into the mixed friction of sliding and rolling, and repair the contact surface through the repair effect. Furthermore, the tribochemical reaction between nanoparticles and friction pairs forms a protective film containing nitride and metal oxides, which can avert direct contact with the matrix and improve the tribological properties. This experiment showed that nitrogen-doped polystyrene-based carbon nanospheres prepared by in-situ doping are the promising materials for wear resistance and reducing friction. This preparing method can be ulteriorly expanded to multi-element co-permeable materials. Nitrogen and boron co-doped carbon nanospheres (B,N@MCNs) were prepared by mixed carbonization of N-enriched PS and boric acid, and exhibited high load carrying capacity and good tribological properties.

In-situ Pyrolysis Synthesis of Multi-Element (F, N, S) Co-Doped Porous Carbon Nanospheres As Lubricating Additives with Improved Tribological Behaviors

Bio-based silsesquioxanes nano hybrids for enhancing the tribological performance of silicone oil: A DFT and experimental study

In-situ formation of nitrogen doped microporous carbon nanospheres derived from polystyrene as lubricant additives for anti-wear and friction reduction

Nitrogen-doped porous carbon nanospheres derived from hyper-crosslinked polystyrene as lubricant additives for friction and wear reduction

Sulfur-Containing Carbon Nanospheres as Lubricant Additives for Antiwear and Friction Reduction

Silica-Coated N-Doped Porous Carbon Nanospheres as Antiwear and Friction-Reduction Lubricant Additives

Tribological Performance of Nanocomposite Carbon Lubricant Additive

Enhanced lubricity and anti-wear performance of zwitterionic polymer-modified N-enriched porous carbon nanosheets as water-based lubricant additive

Polystyrene-derived porous graphite carbon nanospheres with corrosion resistance as a lubricant additive for efficient friction and wear reduction

Fabrication of Vanadium Oxide‐encapsulated Hybrid Carbon Nanospheres for Enhanced Tribological Performance

In-situ synthesis of size-tunable silver sulfide nanoparticles to improve tribological properties of the polytetrafluoroethylene-based nanocomposite lubricating coatings

Nitrogen-Doped Carbon Dot as a Lubricant Additive in Polar and Non-polar Oils for Superior Tribological Properties via Condensation Reaction

Tribological Behavior of Fe3o4/Mos2 Nanocomposites Additives in Aqueous and Oil Phase Media

Synergistic Effects of Carbon Nanotube/Nano-MoS2 Hybrid on Tribological Performance of Polyimide Nanocomposite Films

Tribological Properties of Carbon Fabric/Epoxy Composites Filled with FGr@MoS2 Hybrids under Dry Sliding Conditions

Tribochemical synthesis of functionalized covalent organic frameworks for anti-wear and friction reduction

Preparation and Tribological Properties of Self-Lubricating Epoxy Resins with Oil-Containing Nanocapsules

Synthesis and interfacial interaction of Ag2S quantum dots for enhancing the tribological behaviors of PTFE-based lubricating coatings

Core-rim structured MXene@SiO2 composites as oil-based additives for enhanced tribological properties

In situ preparation of Cu-Mo-S nanoparticle additive with multi-functional tribological properties

Tribological property of dendritic fibrous nano silica composite particle as lubricant additive