Abstract:It was discussed that the research progress and technical achievements had been obtained in the field of residual stress measurement and control of high-grade and large-diameter welded pipe for oil and gas transportation in China. (1) The layout scheme of measuring points and the requirements of spaces between measuring points, hole depth, etc., for residual stress measurement of welded pipe using hole drilling strain-gage method were proposed. On which, the residual stress measurement technology for welded pipe was proposed. (2) The measurement results indicate that the characteristics and distribution of residual stress of SAWH pipes with different grades and sizes were quite different. In general, the residual stress of SAWH pipe was highest, followed by JCOE pipe and UOE pipe. After the ring splitting test, SAWH pipe section usually had relative displacement in circumferential, axial and radial directions, and the degree of deformation varies greatly; But SAWL pipe section usually only occurs circumferential opening, without axial and radial stagger, and the circumferential opening of JCOE pipe was usually larger than that of UOE pipe. (3) Based on the mechanical analysis of the complex deformation of SAWH pipe after the ring splitting test and the superposition principle of elastic mechanics, a prediction model of the residual stress of the high-grade and large-diameter welded pipe suitable for SAWH pipe was established, which overcame the deficiency of the existing prediction models of the residual stress of the welded pipe only considering the circumferential deformation. (4) The key forming parameters affecting the residual stress of SAWH pipe were analyzed and determined as the reduction and forming angle. Combined with the finite element simulation analysis, field adjustment and residual stress analysis, the forming technology and residual stress control technology of low residual stress SAWH pipe were developed.

Stress Relieving Heat Treatment Technology of Oil and Gas Pipeline Based on Stress Detection

The Research on the Stress Analysis of Overhead Steam Pipeline

Research on settlement stress detection and control measures for in-service pipelines in valve chamber

A Study Of The Preheating Temperature Of Directly Buried Heat-Supply Pipeline Based On Intermediate Stress

Measurement and Control of Residual Stress of High-Grade and Large-Diameter Welded Pipe for Oil and Gas Transportation

Stress Analysis of Gas Pipeline in Tunnels on Pressure Testing Condition

A study of the preheating temperature of directly buried heat-supply pipelines based on average stress

Optimization and Stress Analysis of Underground Oil Pipelines in High and Steep Slope Areas

A Multisource Monitoring Data Coupling Analysis Method for Stress States of Oil Pipelines under Permafrost Thawing Settlement Load

Theoretical Study on Upheaval Buckling of Subsea Pipelines with Temperature-Dependent Thermal Properties at Different Carbon Contents

A New Stress Monitoring Method for Mechanical State of Buried Steel Pipelines under Geological Hazards

Stress Distribution and Safety Evaluation of Pipeline in Ice Plug of Nuclear Power

Residual Stress Measurement Using EMAT for X80 Pipeline Steel: Effects of Coating Thickness and Surface Roughness Under Low Surface Preparation Requirements

Study on metal corrosion behavior of heat-affected zone of oil pipeline

Study on Stress Area Law and Detection Range at Key Locations of Natural Gas Station

Research on Pipeline Stress Detection Method Based on Double Magnetic Coupling Technology

Research on residual stress and hydrogen diffusion of X80 pipeline welded joint

COMPUTATIONAL AND EXPERIMENTAL STUDY OF THE STRESS-STRAIN STATE OF A PIPE UNDER EXTERNAL RADIAL LOAD, INTERNAL PRESSURE AND TEMPERATURE DIFFERENCE

Design And Test Of An Extensometer For Strain Monitoring Of High Temperature Pipelines

Welding residual stress analysis of the X80 pipeline: simulation and validation

Welding Residual Stress Measurement of an Urban Buried Gas Pipeline by X-Ray Diffraction Method