Abstract:The corrosion-protection liner (CPL) technology consists of installing flexible plastic liners with anchoring studs inside existing pipelines and subsequently filling cement mortar to the gap between the waterproof liner and the pipeline. With the excellent chemical resistance, impermeability and fast construction speed, CPL provides an economical and environmentally friendly alternative for pipeline rehabilitation without large-scale excavation. However, the seismic performance of water supply pipelines after being retrofitted with CPL has not been well studied yet. In this study, a series of full-scale quasi-static experiments were firstly conducted on ductile-iron push-on joints before and after reinforcement with CPL to investigate the nonlinear behavior of the joints under longitudinal load and transverse bending. Simplified numerical models of straight pipelines with joints before and after retrofitting in the non-uniform site were then developed in the OpenSees platform, and incremental dynamic analysis (IDA) were performed with consideration of nonlinear soil-pipeline interaction. Twenty-eight pairs of ground motions with the peak ground velocities (PGV) collectively scaled from 200 mm/s to 3000 mm/s were used as inputs. Seismic fragility curves of the pipelines before and after retrofitting were developed with respect to the optimum intensity measure, PGV. It can be seen from the experimental results that the longitudinal load and bending moment capacity of the push-on joint increased about 400% and 20% after CPL reinforcement, respectively, and the joint opening and rotation decreased about 20% and 18% after retrofitting. Numerical results show that the CPL reinforced pipelines exhibit better seismic performance and CPL effectively reduces the failure probability of segmented pipelines under earthquake ground excitations.

Design of Enhanced Pipeline Repair Clamp

The Sealing Technology in Pipeline Repair Clamp

Circumferential Sealing Structure of a Subsea Oil and Gas Pipeline Repair Clamp

Lifting of Horizontal Subsea Pipeline with Diverse Lifting Points in Waves: Hydrodynamic Analysis

A Simplified Analytical Solution of Pipeline Response under Normal Faulting

Design and Analysis of a Novel Ship Pipeline Welding Auxiliary Device

Configuration of Submarine Pipeline for Deepwater S-lay Technique

On Collapse Failure Analysis Of Subsea Corroded Sandwich Pipelines Under External Pressure

Parametric study on the mechanical behavior of submarine pipeline for deepwater S-lay operation

Configuration Analysis of Deepwater S-Lay Pipeline

Fracture and Fatigue Assessment on Submarine Pipelines with Crack Damages

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Buckle Propagation Analysis of Deep-Water Petroleum Transmission Pipelines with Axial Tension

Evaluation on the overall design and structural safety of a new type of jet trencher for subsea oil pipelines

Dynamic property evaluation of pipeline clamp based on analyzing the propagation characteristics of flexural wave in pipeline

Evaluation of the Inner Liner Part in Unbonded Flexible Pipelines in the Sealing System of End-Fitting

Seismic fragility analysis of water supply pipelines retrofitted with corrosion-protection liner buried in non-uniform site

Study on damaged micro-mechanism of pipe wall during braking and anchoring process of pipeline intelligent plugging robot

Analysis and design of mechanical crack arrestors for gas pipeline

Experimental Study and Finite Element Analysis for the Installation of A Pipeline into an Existing Pipeline

Analysis and Experiments on Strengthening the Platform Jacket by the Grouted Clamps