Abstract:Developments of oil and gas reservoirs in South China Sea are presently accelerated, to cope with the significant increase in energy demand from the mainland. Pipe-in-Pipe (PIP) flowline systems have been widely employed in this region and are continuously being considered for further developments. This is due to its significant thermal insulation capacity to deal with the High Pressure and High Temperature (HPHT) issue. However, the methods in industry for design of PIP systems usually have two side extremes. Simplified analytical approach may lack of accuracy and detailed FE analysis always brings considerably sophisticated modelling and post-processing tasks. To overcome this situation, COTEC Offshore Solutions, together with its mother company, China Offshore Oil Engineering Company, have developed a cost-effective, beam elements based, 3D simulation model using ABAQUS, a general purpose finite element analysis (FEA) package. The mode allows complicated structures of PIP system to be represented in an effective way and adopts a representation of stinger for S-lay installation analysis. A full-history time-dominate analysis from installation to operation is performed in one model, rather than the commonly used 'snapshot' analysis.In this study, a simplified modeling guidance of PIP components have been suggested. On the basis of the guidance, a novel 3D beam-elements based model has been produced to accurately represent complex PIP structural behaviors, but with minimum increase in modeling complexity. The analysis is carried out on the time-domain basis, which permits the full strain and stress history of the installation and operation to be observed and the most onerous time-point during the full installation and operation to be captured.

Experimental Study and Finite Element Analysis for the Installation of A Pipeline into an Existing Pipeline

A Simplified Analytical Solution of Pipeline Response under Normal Faulting

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

Break-out Resistance of Offshore Pipelines Buried in Inclined Clayey Seabed

Parametric study on the mechanical behavior of submarine pipeline for deepwater S-lay operation

Integrity Assessment of the Pipelines Containing an Isolated Corrosion Pit

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Configuration Analysis of Deepwater S-Lay Pipeline

Configuration of Submarine Pipeline for Deepwater S-lay Technique

Effective Full-History Finite Element Modelling Of Pipe-In-Pipe Flowline System - From Installation To Operation

Structural strength analysis of curved submarine pipes during pipeline connection

Elastic Buckling of Cylindrical Pipe Linings with Variable Thickness Encased in Rigid Host Pipes

Numerical Study of Landslide Impact on Submarine Pipelines

Bending Capacity of Corroded Pipeline Subjected to Internal Pressure and Axial Loadings

Analytical Analysis of Pipeline–soil Interaction During J-lay on a Plastic Seabed with Bearing Resistance Proportional to Depth

Numerical model for pipeline laying during S-lay

Interaction Behavior Between Outer Pipe and Liner Within Offshore Lined Pipeline under Axial Compression

Effective Design of Submarine Pipe-in-pipe Using Finite Element Analysis

Theoretical and experimental study on the change of mechanical properties of pipelines before and after reel-laying

Linear and nonlinear axial behaviour of internal replacement pipe systems for pipeline rehabilitation

Mechanical Analysis of Flexible Pipe During Installation