Abstract:Surface angled cracks on critical components in high-speed machinery can lead to fractures under stress and pressure, posing a significant threat to the operational safety of equipment. To detect surface angled cracks on critical components, this paper proposes a “Quantitative Detection Method for Surface Angled Cracks Based on Full-field Scanning Data.” By analyzing different ultrasonic signals in the full-field scanning data from laser ultrasonics, the width, angle, and length of surface angled cracks can be determined. This study investigates the propagation behavior of ultrasonic waves and their interaction with surface angled cracks through theoretical calculations. The crack width is solved by analyzing the distribution of Rayleigh waves in the full-field scanning data. This paper also discusses the differences in ultrasonic wave propagation between near-field and far-field detection and identifies the critical point between these regions. Different computational methods are employed to calculate the inclination angle and the crack endpoint at various scan positions. Four sets of experiments were conducted to validate the proposed method, with results showing that the errors in determining the width, angle, and length of the surface angled cracks were all within 5%. This confirms the feasibility of the method for detecting surface angled cracks. The quantitative detection of surface angled cracks on critical components using this method allows for a comprehensive assessment of the component’s condition, aiding in the prediction of service life and the mitigation of operational risks. This method shows promising application potential in areas such as aircraft engine blade inspection and gear inspection.

Crack Identification and Quantification Methods under the Condition of Lift-Off Effect Using Alternating Current Field Measurement Technique

A method to compensate for the lift off effect of ACFM in crack estimation of nonferromagnetic metals

Surface Crack Identification on a Cylinder Using the Signal Enhancement of the Scanning Laser Line Source Method

Depth-sensing Indentation Measurement and Finite Element Analysis of Residual Stress Field Near Fatigue Crack Tip

Bicharacteristic Probability of Detection of Crack under Multi-factor Influences Using Alternating Current Field Measurement Technique

Novel phase reversal feature for inspection of cracks using multi-frequency alternating current field measurement technique

Lift-Off Point of Intersection for Eliminating Lift-Off Noise in Alternating Current Field Measurement

Uniform Alternating Current Field Monitoring Sensor Array for Imaging and Quantitation of Cracks in Aluminum Alloy Structures

Deformation Fields Measurement of Crack Tip under High-Frequency Resonant Loading Using a Novel Hybrid Image Processing Method

Characterization of Magnetic Field in Crack Propagation Stage and Application to Non-Destructive Evaluation

Study of Lift-Off Invariance Transformation Method for Quantitative Defect Estimation in Eddy Current Testing

A Cross-Scanning Crack Damage Quantitative Monitoring and Imaging Method

Quantitative Detection of Small Crack by Nonlinear Laser Ultrasonics

A novel fatigue crack angle quantitative monitoring method based on rotating alternating current field measurement

Fatigue Crack Length Sizing Using a Novel Flexible Eddy Current Sensor Array

On-Site Non-contact Detection of the Cracks in Aeroengine Blades by Alternating Current Field Measurement Technique

Fatigue Crack Detection Based on Electromagnetic Testing

Quantitative Detection Method for Surface Angled Cracks Based on Laser Ultrasonic Full-Field Scanning Data

AC-MFL testing method for surface crack on reground billets using flexible parallel-cable-based probe

A New Method to Evaluate Surface Defects with an Electromagnetic Acoustic Transducer

Evaluation of Surface Cracks Using Magnetic Flux Leakage Testing