Abstract:The rapidly increasing atmospheric CO2 concentration has driven research into the development of cost- and energy-efficient materials and processes for the direct air capture of CO2 (DAC). Solid-supported amine materials can give high CO2 uptakes and acceptable sorption kinetics, but they are generally prepared in powder forms that are likely not practically deployable in large-scale operations due to significant pressure drops associated with packed-bed gas-solid contactors. To this end, the development of effective gas-solid contactors for CO2 capture technologies is important to allow processing high flow rates of gas with low-pressure drops and high mass transfer rates. In this study, we demonstrate new laminate-supported amine CO2 sorbents based on the impregnation of low-molecular-weight, branched poly(ethyleneimine) (PEI) into an expanded poly(tetrafluoroethylene) (ePTFE) sheet matrix containing embedded silica particles to form free-standing sheets amenable to incorporation into structured gas-solid contactors. The free-standing sheets are functionalized with PEI using a highly scalable wet impregnation method. This method allowed controllable PEI distribution and enough porosity retained inside the sheets to enable practical CO2 capacities ranging from 0.4 to 1.6 mmol CO2/gsorbent under dry conditions. Reversible CO2 capacities are achieved under both dry and humid temperature swing cycles, indicating promising material stability. The specific thermal energy requirement for the regeneration based on the measured CO2 and water capacities is 287 kJ/mol CO2, where the molar ratio of water to CO2 of 3.1 is achieved using hydrophobic materials. This is the lowest molar ratio among published DAC sorbents. A larger laminate module is tested under conditions closer to larger-scale operations (linear velocities 0.03, 0.05, and 0.1 m/sec) and demonstrates a stable capacity of 0.80 CO2/gsorbent over five cycles of CO2 adsorption and steam regeneration. The PEI-impregnated ePTFE/silica composite sorbent/contactors demonstrate promising DAC performance derived from the amine-filled silica particles contained in hydrophobic ePTFE domains to reduce water sorption and its concomitant regeneration energy penalty.

Facile Synthesis of Structured Adsorbent with Enhanced Hydrophobicity and Low Energy Consumption for CO2 Capture from the Air

Polyethylenimine-Grafted Hkust-Type Mof/Poiyhipe Porous Composites (Pei@Pgd-H) As Highly Efficient Co(2 )Adsorbents

Easily-synthesized and low-cost amine-functionalized silica sol-coated structured adsorbents for CO2 capture

Design and development of 3D hierarchical ultra-microporous CO2-sieving carbon architectures for potential flow-through CO2 capture at typical practical flue gas temperatures

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Direct Air Capture of CO2 Using Poly(ethyleneimine)-Functionalized Expanded Poly(tetrafluoroethylene)/Silica Composite Structured Sorbents

Structurally Designed Synthesis of Mechanically Stable Poly(benzoxazine-co-resol)-Based Porous Carbon Monoliths and Their Application As High-Performance CO2 Capture Sorbents

Promoting the CO2 Adsorption in the Amine-Containing SBA-15 by Hydroxyl Group

Facile fabrication of mesoporosity silica as support for solid amine CO2 adsorbents with enhanced adsorption capacity and kinetics

A Soluble and Recyclable Polymeric Adsorbent of Intrinsic Microporosity for CO2 Capture

Epoxide-functionalized Tetraethylenepentamine Encapsulated into Porous Copolymer Spheres for CO2 Capture with Superior Stability

Adsorption and Regeneration Study of Polyethylenimine-Impregnated Millimeter-Sized Mesoporous Carbon Spheres for Post-Combustion CO2 Capture

Facile Large-Scale Synthesis of Macroscopic 3D Porous Graphene-Like Carbon Nanosheets Architecture for Efficient CO2 Adsorption

Efficient Capture of CO2 over Ordered Micro-Mesoporous Hybrid Carbon Nanosphere

Design of biomass-based N, S co-doped porous carbon via a straightforward post-treatment strategy for enhanced CO2 capture performance

A cost-effective synthesis of heteroatom-doped porous carbon by sulfur-containing waste liquid treatment: As a promising adsorbent for CO2 capture

Facile synthesis and biomimetic amine-functionalization of chitosan foam for CO2 capture

Design of Amine-Functionalized Layered Double Oxide Nanosheets with Efficient CO2 Capture Capacities from Ambient Air, Ultrafast Kinetics, and Promising Stability

Hierarchical porous polystyrene-based activated carbon spheres for CO2 capture

Application of Polyethylenimine‐impregnated Solid Adsorbents for Direct Capture of Low‐concentration CO2