Abstract:The rapidly increasing atmospheric CO2 concentration has driven research into the development of cost- and energy-efficient materials and processes for the direct air capture of CO2 (DAC). Solid-supported amine materials can give high CO2 uptakes and acceptable sorption kinetics, but they are generally prepared in powder forms that are likely not practically deployable in large-scale operations due to significant pressure drops associated with packed-bed gas-solid contactors. To this end, the development of effective gas-solid contactors for CO2 capture technologies is important to allow processing high flow rates of gas with low-pressure drops and high mass transfer rates. In this study, we demonstrate new laminate-supported amine CO2 sorbents based on the impregnation of low-molecular-weight, branched poly(ethyleneimine) (PEI) into an expanded poly(tetrafluoroethylene) (ePTFE) sheet matrix containing embedded silica particles to form free-standing sheets amenable to incorporation into structured gas-solid contactors. The free-standing sheets are functionalized with PEI using a highly scalable wet impregnation method. This method allowed controllable PEI distribution and enough porosity retained inside the sheets to enable practical CO2 capacities ranging from 0.4 to 1.6 mmol CO2/gsorbent under dry conditions. Reversible CO2 capacities are achieved under both dry and humid temperature swing cycles, indicating promising material stability. The specific thermal energy requirement for the regeneration based on the measured CO2 and water capacities is 287 kJ/mol CO2, where the molar ratio of water to CO2 of 3.1 is achieved using hydrophobic materials. This is the lowest molar ratio among published DAC sorbents. A larger laminate module is tested under conditions closer to larger-scale operations (linear velocities 0.03, 0.05, and 0.1 m/sec) and demonstrates a stable capacity of 0.80 CO2/gsorbent over five cycles of CO2 adsorption and steam regeneration. The PEI-impregnated ePTFE/silica composite sorbent/contactors demonstrate promising DAC performance derived from the amine-filled silica particles contained in hydrophobic ePTFE domains to reduce water sorption and its concomitant regeneration energy penalty.

Design of Amine-Functionalized Layered Double Oxide Nanosheets with Efficient CO2 Capture Capacities from Ambient Air, Ultrafast Kinetics, and Promising Stability

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

Modified Layered Double Hydroxides for Efficient and Reversible Carbon Dioxide Capture from Air

Scalable Synthesis of Amine-Grafted Ultrafine Layered Double Hydroxide Nanosheets with Improved Carbon Dioxide Capture Capacity from Air

Direct Air Capture of CO2 with Metal Nitrate-Doped, Tetraethylenepentamine-Functionalized SBA-15 Adsorbents

Efficient CO(2)capture from ambient air with amine-functionalized Mg-Al mixed metal oxides

Self-Assembled Core-Shell Structure MgO@TiO2 as a K2CO3 Support with Superior Performance for Direct Air Capture CO2

The amine-functionalized alumina captures CO 2 directly from the ambient air in the Rotating Adsorption Bed

Design of Alkali Metal Oxide Adsorbent for Direct Air Capture: Identification of Physicochemical Adsorption and Analysis of Regeneration Mechanism

Amine/vermiculite Composite Aerogels Fabricated by Polyethyleneimine-Induced Vermiculite Nanosheet Gelation for Efficient Direct Air Capture

Development of High Capacity Moisture-Swing DAC Sorbent for Direct Air Capture of CO2

Direct Air Capture of CO2 Using Poly(ethyleneimine)-Functionalized Expanded Poly(tetrafluoroethylene)/Silica Composite Structured Sorbents

Structure-performance relationship of additive-incorporated tetraethylenepentamine-functionalized SiO2 in direct air capture of CO2

Quaternary functionalized mesoporous adsorbents for ultra-high kinetics of CO2 capture from air

Triethanolamine-modified layered double oxide for efficient CO2 capture with low regeneration energy

Enhancing Adsorbent Performance for Direct Air Capture of CO2 by In-Situ Amine-Grafting of Layered Double Hydroxides

Amine-functionalized macroporous resin for direct air capture with high CO2 capacity in real atmospheric conditions: Effects of moisture and oxygen

Development of sorbent materials for direct air capture of CO2

Amine-Functionalized Meso-Macroporous Polymers for Efficient CO 2 Capture from Ambient Air

High Efficiency Mixed Amine Adsorbents for Directly Capturing Carbon Dioxide from Air