Abstract:With the dramatic increase in CO 2 emissions over the last few decades and the subsequent rise in global temperatures leading to climate change, substantial efforts have been directed towards the development of materials designed for the direct capture of CO 2 from the atmosphere, a process known as direct air capture (DAC). DAC stands out as one of the primary negative emission technologies (NETs) expected to play a pivotal role in achieving negative CO 2 emissions. However, most of the reported sorbent performances have been focused on ambient temperatures (around 25 °C) or higher, specifically under dry conditions, with very few exceptions. This limitation has posed a significant obstacle to the widespread deployment of DAC, as a substantial portion of the world experiences sub-ambient temperatures and non-zero humidity levels. In this study, we evaluate the in-situ cationic ring-opening polymerization of three different 2-oxazolines monomers initiated by CPTMS or IPTMS, which are chemically tethered to mesoporous silica foam and large-pore alumina-silica supports and their performance for CO 2 capture under various conditions. Among all combinations of supports, initiators, and monomers, the MSF-C-EtOX sorbent demonstrated exceptional utilization of the support, initiator, and monomer properties, resulting in superior CO 2 uptakes under various conditions. The optimum adsorption temperature at dry condition was found to be 40°C, achieving a CO 2 uptake of 1.72 mmol/g. Further testing under sub-ambient dry adsorption conditions at -20°C showed a CO 2 capacity of 0.80 mmol/g. The introduction of moisture significantly enhanced CO 2 uptakes, reaching 2.45 mmol/g at 20 °C. Under humid conditions, the sorbent exhibited robust performance at low temperatures, with CO 2 uptakes of 1.88 and 1.40 mmol/g at 0°C and -20°C, respectively. Importantly, the sorbent demonstrated stable cyclic capacity over 10 and 50 cycles under humid and dry conditions, respectively. The findings presented in this study suggest that supported in-situ polymerized amines are promising materials for DAC under ambient-temperature and low-temperature conditions. There are additional prospects for fine-tuning these materials to facilitate the large-scale implementation of DAC facilities in diverse environmental conditions.

The amine-functionalized alumina captures CO 2 directly from the ambient air in the Rotating Adsorption Bed

Unveiling the Porosity Effect of Superbase Ionic Liquid-Modified Carbon Sorbents in CO 2 Capture from Air

Bi-disperse Adsorption Model of the Performance of Amine Adsorbents for Direct Air Capture

Direct air capture of CO2 by amine-impregnated resin: The effect of resin pore structure and humid conditions

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Direct Air Capture of CO2 Using Poly(ethyleneimine)-Functionalized Expanded Poly(tetrafluoroethylene)/Silica Composite Structured Sorbents

High Gravity-Enhanced Direct Air Capture: A Leap Forward in CO2 Adsorption Technology

Amine-functionalized macroporous resin for direct air capture with high CO2 capacity in real atmospheric conditions: Effects of moisture and oxygen

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture

A general Energy-Efficient strategy for optimizing CO 2 Capture: Designing and harnessing the rapid adsorption kinetics of Amine-Impregnated adsorbents

Revealing the correlation between the performance of silica-based DAC adsorbents and their pore natures

Enhancing Adsorbent Performance for Direct Air Capture of CO2 by In-Situ Amine-Grafting of Layered Double Hydroxides

Direct Air Capture of CO2 Using Bi-Amines-functionlized Hierarchical Mesoporous Silica: Effects of Organic Amine Loading, Moisture and Temperature

Comparative analysis of amine-functionalized silica for direct air capture (DAC): Material characterization, performance, and thermodynamic efficiency

Mixed polyamines promotes CO2 adsorption from air

Ultra-highly Efficient Adsorbent for CO2 Capture from Air by Directional Deprotonation Regulation of MOFs-based Amine Grafting

Minimizing the effect of oxygen on supported polyamine for direct air capture

Amine-impregnated porous carbon–silica sheets derived from vermiculite with superior adsorption capability and cyclic stability for CO 2 capture

Scalable Synthesis of Amine-Grafted Ultrafine Layered Double Hydroxide Nanosheets with Improved Carbon Dioxide Capture Capacity from Air

Structure-performance relationship of additive-incorporated tetraethylenepentamine-functionalized SiO2 in direct air capture of CO2

Ambient and sub-ambient temperature direct air CO2 capture (DAC) by novel supported in-situ polymerized amines