Abstract:A molten‐salt‐assisted approach is proposed to synthesize single‐crystal NMC using pure carbonate salts. This method obviates the necessity for precursor processes and simplified the synthetic procedure for SC‐NMC down to a single isothermal sintering step. This molten‐salt‐assisted approach also displays the potential for preparing SC‐NMC from spent low‐Ni PC‐NMC, making it a versatile and broadly applicable method for SC‐NMC cathode materials. Single‐crystal lithium–nickel–manganese–cobalt‐oxide (SC‐NMC) is attracting increasing attention due to its excellent structural stability. However, its practical production faces challenges associated with complex precursor preparation processes and severe lithium–nickel cation mixing at high temperatures, which restricts its widespread application. Here, a molten‐salt‐assisted method is proposed using low‐melting‐point carbonates. This method obviates the necessity for precursor processes and simplified the synthetic procedure for SC‐NMC down to a single isothermal sintering step. Multiple characterizations indicate that the acquired SC‐LiNi0.6Mn0.2Co0.2O2 (SC‐622) exhibits favorable structural capability against intra‐granular fracture and suppressive Li+/Ni2+ cation mixing. Consequently, the SC‐622 exhibits superior electrochemical performance with a high initial specific capacity (174 mAh g−1 at 0.1 C, 3.0–4.3 V) and excellent capacity retention (87.5% after 300 cycles at 1C). Moreover, this molten‐salt‐assisted method exhibits its effectiveness in directly regenerating SC‐622 from spent NMC materials. The recovered material delivered a capacity of 125.4 mAh g−1 and retained 99.4% of the initial capacity after 250 cycles at 1 C. This work highlights the importance of understanding the process‐structure‐property relationships and can broadly guide the synthesis of other SC Ni‐rich cathode materials.

Green Synthesis of High-Performance Li1.2Mn0.6Ni0.2O2 with the Assist of a Microreactor

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Ton-scale preparation of single-crystal Ni-rich ternary cathode materials for high-performance lithium ion batteries

Synthesizing high performance LNMO cathode materials with porous structure by manipulating reynolds number in a microreactor

A short process and low-cost preparation of single crystal LiNi0.6Co0.2Mn0.2O2 cathode for lithium-ion batteries

One‐Step Molten‐Salt‐Assisted Approach for Direct Preparation and Regeneration of LiNi0.6Co0.2Mn0.2O2 Cathode

Introducing an Efficient and Eco-Friendly Spray-Drying Process for the Synthesis of NCM Precursor for Lithium-ion Batteries

Synthesis and Evaluation of Microspherical Li1.2Mn0.54Co0.13Ni0.13O2 Through Carbon Dioxides-assisted Co-precipitation Method for Lithium-ion Battery

In situ epitaxial growth and electrochemical conversion of LiNi0.5Mn1.5O4 thin layer on Ni-rich cathode materials for high voltage lithium-ion batteries

A simple one-step molten salt method for synthesis of micron-sized single primary particle LiNi0.8Co0.1Mn0.1O2 cathode material for lithium-ion batteries

Two-Step Oxalate Approach for the Preparation of High Performance Lini0.5mn1.5o4 Cathode Material with High Voltage

A green and economical route to the precursor for the synthesis of single crystal LiNi0.5Co0.2Mn0.3O2

Exploit Li2MnO3 Activity by Two Phase Coexistence at Atomic Level Towards High Performance Mn-based Co-free Li-rich Cathodes

Systematic Optimization of Battery Materials: Key Parameter Optimization for the Scalable Synthesis of Uniform, High-Energy, and High Stability LiNi 0.6 Mn 0.2 Co 0.2 O 2 Cathode Material for Lithium-Ion Batteries

General synthesis of xLi2MnO3·(1 - X)LiMn 1/3Ni1/3Co1/3O2 nanomaterials by a molten-salt method: Towards a high capacity and high power cathode for rechargeable lithium batteries

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Hydrothermal Synthesis and Electrochemical Performance of Micro-spherical LiNi1/3Co1/3Mn1/3O2 Cathode Material

Synthesis and performance study of Li_(1.1)Ni_(0.35)Mn_(0.55)O_2 cathode material of lithium-ion batteries

One-step Synthesis and Effect of Heat-Treatment on the Structure and Electrochemical Properties of LiNi0.5Mn1.5O4 Cathode Material for Lithium-Ion Batteries

Synthesis and Electrochemical Performance of High-Capacity 0.34li2mno3·0.66limn0.63ni0.24co0.13o2 Cathode Materials Using a Couette–Taylor Reactor

Strategy for Synthesizing Spherical Lini0.5mn1.5o4 Cathode Material for Lithium Ion Batteries