Abstract:Superior high temperature strength, better thermodynamic stability and good workability are some of the desirable attributes of structural materials for next generation nuclear reactors. In this regard, the present study involves the development of a low density, equiatomic ZrNbVTiAl High Entropy Alloy (HEA) for nuclear applications. The alloy was designed using a combination of thermodynamic simulations and first principle techniques and later synthesized using levitation melting to ensure better purity and compositional homogeneity. The melted alloy possessed lower density (5.76 g/cm3) and higher hardness (5.7 GPa) in comparison to conventional structural materials like austenitic steel. Detailed characterization of the alloy showed the presence of bcc type phase along with small fractions of Al- Zr type intermetallics in as-solidified condition. The mechanical properties of the equiatomic ZrNbVTiAl alloy were studied using compression testing at room temperature and up to 1000 °C. The alloy exhibited superior specific yield strength as well as dynamic recrystallization at high temperatures resulting in the breaking of cast structure, thereby reflecting its appreciable workability. The alloy also showed a satisfactory elastic modulus (128 GPa) when measured using ultrasonic technique. The experimentally measured values of elastic moduli of alloy were compared with the values obtained through Density Functional Theory (DFT) simulations and the results matched within acceptable range. Results from the present study indicates that the equiatomic ZrNbVTiAl alloy could be a suitable candidate for light weight, high temperature and high strength structural applications.

A Novel (vnb)80(tati)20 Refractory High Entropy Alloy with Excellent Mechanical Properties at the As-Cast State

A novel lightweight refractory high-entropy alloy

Microstructure and Mechanical Properties of a New Refractory HfNbSi<sub>0.5</sub>TiVZr High Entropy Alloy

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Ductile W0.4MoNbxTaTi refractory high-entropy alloys with excellent elevated temperature strength

Microstructure and Mechanical Properties of A Refractory Hfnbtivsi0.5 High-Entropy Alloy Composite

Temperature dependent deformation behavior and strengthening mechanisms in a low density refractory high entropy alloy Al10Nb15Ta5Ti30Zr40

Microstructure and Mechanical Properties of the Ti62Nb12Mo12Ta12W2 Refractory High Entropy Alloy Prepared through Spark Plasma Sintering

Effect of Ti Additions on Mechanical Properties of NbMoTaW and VNbMoTaW Refractory High Entropy Alloys

An as-cast Ti-V-Cr-Al light-weight medium entropy alloy with outstanding tensile properties

A single-phase V0.5Nb0.5ZrTi refractory high-entropy alloy with outstanding tensile properties

High-Temperature Mechanical Properties of NbTaHfTiZrV0.5 Refractory High-Entropy Alloys

A novel as-cast NbTiC2/FeCrNiCu high entropy alloy matrix composite with remarkable tensile properties

Microstructure and mechanical properties of lightweight Al CrNbTiV(x = 0.2, 0.5, 0.8) refractory high entropy alloys

Effects of Ti content on the tensile ductility, lattice distortion and mechanical properties of VNbTaTi x refractory high-entropy alloys

Enhanced Mechanical Properties of HfMoTaTiZr and HfMoNbTaTiZr Refractory High-Entropy Alloys

Design of VNbTaMox Body‐Centered‐Cubic Refractory High‐Entropy Alloys with Excellent Ultrahigh‐Temperature Mechanical Properties and Ductility

Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys

Lightweight, Refractory High-Entropy Alloy, CrNbTa0.25TiZr, with High Yield Strength

Design and development of low density, high strength ZrNbAlVTi high entropy alloy for high temperature applications

A fine-grained NbMoTaWVCr refractory high-entropy alloy with ultra-high strength: Microstructural evolution and mechanical properties