Abstract:Uniform ZrO(OH)2 nanocoatings on Ni‐rich hydroxide precursors are achieved via a decomposition‐promoted precipitation (DPP) protocol. Gradient surface Zr doping and refined microstructure in products are achieved through the following lithiation. This integrated modulation suppresses side reactions and deleterious phase transition. Consequently, the cell delivers a high‐capacity retention of 87.2% over 200 harsh cycles at 0.2 C. Ni‐rich layered cathodes with ultrahigh nickel content (≥90%), for example LiNi0.9Co0.1O2 (NC0.9), are promising for next‐generation high‐energy Li‐ion batteries (LIBs), but face stability issues related to structural degradation and side reactions during the electrochemical process. Here, surface modulation is demonstrated by integrating a Li+‐conductive nanocoating and gradient lattice doping to stabilize the active cathode efficiently for extended cycles. Briefly, a wet‐chemistry process is developed to deposit uniform ZrO(OH)2 nanoshells around Ni0.905Co0.095(OH)2(NC0.9‐OH) hydroxide precursors, followed by high temperature lithiation to create reinforced products featuring Zr doping in the crust lattice decorated with Li2ZrO3 nanoparticles on the surface. It is identified that the Zr4+ infiltration reconstructed the surface lattice into favorable characters such as Li+ deficiency and Ni3+ reduction, which are effective to combat side reactions and suppress phase degradation and crack formation. This surface control is able to achieve an optimized balance between surface stabilization and charge transfer, resulting in an extraordinary capacity retention of 96.6% after 100 cycles at 1 C and an excellent rate capability of 148.8 mA h g−1 at 10 C. This study highlights the critical importance of integrated surface modulation for high stability of cathode materials in next‐generation LIBs.

In Situ Doping Polyanions Enables Concentration-Gradient Ni-Rich Cathodes for Long-Life Lithium-Ion Batteries

Progressive Concentration Gradient Nickel-Rich Oxide Cathode Material for High-Energy and Long-Life Lithium-Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Mitigation of Cation Mixing of LiNiO2-based Cathode Materials by Li-doping for High-Performing Lithium-Ion Battery

Architecting Robust Full Concentration Gradient NCM712 Cathodes for High-Energy Li-Ion Batteries

Ta/Ti Codoped Concentration Gradient High-Ni Cathodes for Long-Life Li-Ion Batteries

Gradient Boracic Polyanion Doping-Derived Surface Lattice Modulation of High-Voltage Ni-Rich Layered Cathodes for High-Energy-Density Li-Ion Batteries

Achieving Long‐Life Ni‐Rich Cathodes with Improved Mechanical‐Chemical Properties Via Concentration Gradient Structure

High-Ni NMC Cathode Material with Concentration Gradients in Lithium-Ion Batteries

One-step Surface-to-bulk Modification of Single-Crystalline Ni-rich Co-poor Cathodes for High-Rate and Long-Life Li-ion Batteries at High-Voltage Operations

Preparation of Long-term Cycling Stable Ni-Rich Concentration–Gradient NCMA Cathode Materials for Li-Ion Batteries

Outstanding Electrochemical Performance of Ni-Rich Concentration-Gradient Cathode Material LiNi0.9Co0.083Mn0.017O2 for Lithium-Ion Batteries

Synthesis of Full Concentration Gradient Cathode Studied by High Energy X-ray Diffraction

Gradient-porous-structured Ni-rich Layered Oxide Cathodes with High Specific Energy and Cycle Stability for Lithium-Ion Batteries

Surface Engineering of Ni-Rich Cathodes Enables Homogeneous Doping of High-Valence Mo Ions for Li-Ion Batteries

Surface Gradient Ni‐rich Cathode for Li‐ion Batteries

Si doping to passivate high-voltage medium‐nickel low-cobalt layered oxide cathode reactivity enabling longer life lithium-ion battery

Integrated Surface Modulation of Ultrahigh Ni Cathode Materials for Improved Battery Performance

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

High-rate Structure-Gradient Ni-rich Cathode Material for Lithium-Ion Batteries.

Stabilizing Ni‐Rich LiNi 0.92 Co 0.06 Al 0.02 O 2 Cathodes by Boracic Polyanion and Tungsten Cation Co‐Doping for High‐Energy Lithium‐Ion Batteries