Abstract:Titanium carbide based composites have attracted much attention owing to their light weight, high elastic modulus, and excellent wear resistance. However, the hot working of these composites has been facing great challenges, especially for the coordinated deformation of brittle phase. Here, soft Ti phase was introduced to improve the thermal deformation ability. In particular, the dynamic recrystallization (DRX) mechanism, crack propagation, and dislocation motion behavior of brittle Ti 2 C matrix were unveiled in this study. Firstly, a Ti 2 C-Ti composite was hot compressed at 770–1000 °C with strain rates of 0.012–0.0013 s −1 . The results showed that the optimal processing temperature was 950 °C, at which the microstructure can be refined by DRX behavior without the occurrence of macro instability. In the later softening stage of hot compression, the recrystallized Ti 2 C grains were formed through both discontinuous dynamic recrystallization (DDRX) and continuous dynamic recrystallization (CDRX). The intergranular Ti phase, which acts as a binder, coordinated the deformation of the Ti 2 C-Ti composite, and the phase boundaries attracted dislocations on the side of the brittle Ti 2 C phase. This dislocation motion behavior mitigated stress concentration but inhibited the DRX behavior of the Ti 2 C phase near the binary phase interfaces. The lamellar Ti precipitates within Ti 2 C grains facilitated the occurrence of CDRX by promoting the formation of subgrains. The subgrain boundaries were formed when the average distance between dislocation on the dislocation wall was lower than 8.68 nm. Compared with the as-sintered composite, the nanohardness of the Ti 2 C matrix in the composite deformed at 950 °C increased by 17%. The enhanced hardness was mainly attributed to grain boundary and dislocation strengthening effect, as well as the reduction of Ti precipitates.

Heterogeneous Dynamic Recrystallization in the Isothermal Compression of Ti55-Tibw Composite in Α+Β Region

Unexpected Dynamic Recrystallization Behavior of Ti-7Cu Alloy in Semi-Solid State

A new dynamic recrystallization mechanism in adiabatic shear band of an α/β dual phase titanium alloy: Composition redistribution

High-temperature deformation behavior and recrystallization mechanism of a near beta titanium alloy Ti-55511 in β phase region

Grain fragmentation associated continuous dynamic recrystallization (CDRX) of hexagonal structure during uniaxial isothermal compression: High-temperature α phase in TiAl alloys

Hot deformation behavior and dynamic recrystallization mechanism of Ti 2 ZrTa 0.75 refractory complex concentrated alloy

Dynamic recrystallization and hot processing map of Ti-48Al-2Cr-2Nb alloy during the hot deformation

Dynamic Recrystallization Constitutive Model and Texture Evolution of Metastable β Titanium Alloy TB8 during Thermal Deformation

Spheroidization and dynamic recrystallization mechanisms of Ti-55511 alloy with bimodal microstructures during hot compression in α+β region

Dynamic Recrystallization Behaviour of Nb-Ti Microalloyed Steels

Microstructure evolution of TiBw/Ti composites during severe plastic deformation: Spheroidization behavior

The "pinning" effect of in-situ TiB whiskers on the hot deformation behavior and dynamic recrystallization of (10 vol%) TiB/Ti-6Al-4V composites

Dynamic recrystallization mechanisms and microstructure evolution of a novel Al-Zn-Mg-Cu-Zr alloy by isothermal compression

Microstructure evolution and dynamic recrystallization mechanism during thermal deformation of GH4698 superalloy

Unveiling the dynamic softening mechanism via micromechanical behavior for a near-β titanium alloy deformed at a high strain rate

The effect of deformation parameters on the dynamic recrystallization and microstructure evolution of the quasi-continuous network reinforced TiAl/B4C composites

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Microstructural Development, Deformation Behavior, and Texture Evolution Investigation during Hot Compression of a Dynamically Recrystallized Ti-5Cu Alloy in the Dual (α + β) Phase Region

Thermal deformation behavior and dynamic recrystallization mechanism of GH4065A alloy considering the effect of γ′ phase

Effect of dynamic recrystallization on texture orientation and grain refinement of Ti6Al4V titanium alloy subjected to laser shock peening

Revealing hot deformation behavior of Ti 2 C-Ti composite and associated dynamic recrystallization mechanism of ceramic matrix