Abstract:• A crystal plasticity model for synchronously accounting for DRX and thermomechanics of titanium. • Effects of dynamic recovery and DRX on dislocation density were considered simultaneously. • Repeated nucleation of the recrystallized grains was taken into accounted. A new crystal plasticity model was proposed for synchronously responding dynamic recrystallization (DRX) and thermomechanical behavior of wrought two-phase titanium alloys. Within the crystal plasticity framework, the theories for dislocation density evolution and DRX were introduced and modified. The shear strain rate of slip system calculated via crystal plasticity was employed to determine the dislocation density of a grain. Dislocation annihilation caused by dynamic recovery was incorporated. The evolution of the dislocation densities in the matrix grain (M-grain) and the recrystallized grain (R-grain) was considered individually, thus, repeated nucleation of the recrystallized grains was permitted. They were considered to take place once the dislocation density of a grain (M-grain or R-grain) reached a critical value. The equivalent dislocation density of the grains aggregate (R-grains and M-grain) was calculated via a volume-averaged approach using the recrystallized fraction. The recrystallized fraction was updated by accounting for the percentage of the grain boundary density of the unrecrystallized matrix. This model was coded as a VUMAT in ABAQUS/Explicit and embedded in the finite element method for the simulation of isothermal compression on a two-phase titanium alloy. The predictions of the model are in good agreement with experimental data of the IMI834 alloy. The synchronous coupling effects of thermal deformation responses and DRX are accounted for, which improves the accuracy of the simulation results, e.g., the maximal error of the predicted steady stress to experiment is 3.1%. Nucleation rate and R-grains growth are quantified under different deformation conditions. The former is far larger (more than 20 times) in the α + β region than that in the β region, and the latter is about 0.55∼0.75 times in the α + β region of that in the β region. The effects that intergranular non-uniform deformation due to grain orientations and interphase non-uniform deformation due to different properties do on DRX are quantified. Nucleation rate and the recrystallized fraction at phase interface are about 4 and 10 times, respectively, of those within the β phase. Nucleation rate at β -grain boundary seems uniform, while, the recrystallized fraction becomes more and more non-uniform with increasing deformation.

Grain fragmentation associated continuous dynamic recrystallization (CDRX) of hexagonal structure during uniaxial isothermal compression: High-temperature α phase in TiAl alloys

Crystallographic orientation related dynamic recrystallization behavior and its impact on texture development of high-temperature α phase in TiAl alloy

Deformation Mode Dependent Mechanism and Kinetics of Dynamic Recrystallization in Hot Working of Titanium Alloy

Dynamic Recrystallization and Texture Evolution of Ti-22Al-25Nb Alloy During Plane-Strain Compression

Deformation behavior and dynamic recrystallization mechanism of a novel high Nb containing TiAl alloy in (? plus ?) dual-phase field

Dynamic Recrystallization Mechanism and Twinning Behavior in Hot Deformation of Ti-46.5Al-2Nb-2Cr with Initial Duplex Microstructure

Interaction effect between alpha and beta phases based on dynamic recrystallization of isothermally compressed Ti-5Al-2Sn-2Zr-4Mo-4Cr with basketweave microstructure

Hot Deformation Behavior and Dynamic Recrystallization of a Β-Solidifying TiAl Alloy

Dynamic recrystallization and hot processing map of Ti-48Al-2Cr-2Nb alloy during the hot deformation

Heterogeneous Dynamic Recrystallization in the Isothermal Compression of Ti55-Tibw Composite in Α+Β Region

Mechanism of continuous dynamic recrystallization of Ti-6Al-4V alloy during superplastic forming with sub-grain rotation

Interaction Between Dynamic Recrystallization and Phase Transformation of Ti-43Al-4Nb-1Mo-0.2B Alloy During Hot Deformation

Experimental Study and Numerical Simulation of Dynamic Recrystallization Behavior of TiAl-based Alloy

Crystal Plasticity Modeling of the Dynamic Recrystallization of Two-Phase Titanium Alloys During Isothermal Processing

Dynamic recrystallization, phase transformation and deformation mechanisms of a novel Ti-43Al-6Nb-1Mo-1Cr alloy during the isothermal deformation

Dynamic recrystallization mechanisms and microstructure evolution of a novel Al-Zn-Mg-Cu-Zr alloy by isothermal compression

Dynamic Recrystallization Mechanism of Γ and Α Phases During the Isothermal Compression of Γ-Tial Alloy with Duplex Structure

Continuous Dynamic Recrystallization Behaviors in a Single-Phase Deformed Ti-55511 Alloy by Cellular Automata Model

Investigation on Transformation-Related Recrystallization Behavior of Ti2AlNb-based Alloy

A new dynamic recrystallization mechanism in adiabatic shear band of an α/β dual phase titanium alloy: Composition redistribution

Microstructure evolution and dynamic recrystallization mechanism during thermal deformation of GH4698 superalloy