Abstract:GH3625 alloy is widely used in aviation, nuclear power and other fields of hot section components. However, the high alloying level, significant deformation resistance, and narrow hot working window of the alloy bring great challenge to the plastic deformation of the alloy. The hot deformation behavior and microstructure evolution of as-forged GH3625 alloy were studied by hot compression tests with deformation temperatures of 930–1180 °C, strain rates of 0.001–1 s −1 and true strain of 0.92. The results show that the flow stress of the alloy exhibits noticeable characteristics of temperature-negative sensitivity and rate-positive sensitivity. The true stress-strain curves are of two types: dynamic recovery (DRV) and dynamic recrystallization (DRX). The strain-compensated Arrhenius constitutive model was used to predict the alloy's flow behavior, with a linear fitting correlation coefficient (R) of 0.9872 and an average relative error (AARE) of 8.92%. The hot processing map of the alloy based on Prasad was constructed and superimposed. It was found that there were two instability regions, which were located in the low temperature and high strain rate region and the high temperature and low strain rate region respectively. The optimal processing region was 1154∼1180 °C/0.75–1 s −1 combined with the true stress-strain curves and the microstructure. Continuous dynamic recrystallization (CDRX) at subgrains rotation and discontinuous dynamic recrystallization (DDRX) at grain boundaries were identified during thermal deformation. As the η value decreases, the dynamic recrystallization grain size decreases under the deformation condition of 930–1180 °C/1 s −1 , and the microstructure evolution mechanism changes from DDRX→ DDRX + CDRX→ DDRX + CDRX + DRV → CDRX + DRV, and ∑3 TBs also reduces.

Thermal deformation behavior and dynamic recrystallization mechanism of GH4065A alloy considering the effect of γ′ phase

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Microstructure evolution and dynamic recrystallization mechanism during thermal deformation of GH4698 superalloy

Hot deformation behavior and dynamic recrystallization mechanisms of GH4975 alloy prepared by electron beam smelting layered solidification

Dynamic recrystallization mechanisms of as‐extruded GH4151 alloy during hot deformation

Hot Deformation Characteristics and Dynamic Recrystallization Mechanisms of a Novel Nickel‐Based Superalloy

Investigation on Sub-Solvus Recrystallization Mechanisms in an Advanced γ-γ’ Nickel-Based Superalloy GH4151

Study on the dynamic recrystallization mechanisms of GH5188 superalloy during hot compression deformation

Microstructure and Microtexture Evolution of Dynamic Recrystallization of a Ni-based Superalloy under High-Throughput Gradient Thermal Compression

Thermal deformation behavior and microstructure evolution of GH4169 superalloy under the shear-compression deformation conditions

Study on the hot deformation behavior and microstructure evolution of as-forged GH3625 alloy

Hot Deformation and Dynamic Recrystallization of 7075 Al Alloy in the Extruded State

Microstructural evolution of GH4079 superalloy during hot deformation and heat treatment

Hot deformation behavior and flow stress modeling of coarse-grain nickel-base GH4151 superalloy ingot materials in cogging

Constitutive Model and Microstructure Evolution of a Novel TG6 High-Temperature Titanium Alloy during Hot Deformation

Unexpected Dynamic Recrystallization Behavior of Ti-7Cu Alloy in Semi-Solid State

Experimental Investigations and Constitutive Modeling of the Dynamic Recrystallization Behavior of a Novel GH4720Li Superalloys with Yttrium Micro-Alloying

Dynamic Recrystallization Behavior of Fe–20Cr–30Ni–0.6Nb–2Al–Mo Alloy

Dynamic recrystallization mechanisms of as-forged Al–Zn–Mg-(Cu) aluminum alloy during hot comp.ression deformation

Continuous Dynamic Recrystallization and Deformation Behavior of an AA1050 Aluminum Alloy during High-Temperature Compression

Microstructural Evolution and Dynamic Recrystallization Behavior of the Homogenized 2195 Al–Li Alloy During Hot Deformation