Abstract:Catalytic pyrolysis is considered a promising strategy for the utilisation of plastic waste from the economic and environmental perspectives. As such, the supporting materials play a critical role in the properties of the catalyst. This study clarified this influence on the dispersion of the iron (Fe) within an experimental context. Four different types of typical supports with different physical structures were introduced and explored in a two-stage fixed-bed reactor; these included metallic oxides (Al2O3, TiO2), a non-metallic oxide (SiO2), and molecular sieves (ZSM-5). The results show that the liquid products were converted into carbon deposits and lighter gaseous products, such as hydrogen. The Al2O3-supported catalyst with a relatively moderate specific surface areas and average pore diameter exhibited improved metal distribution with higher catalytic activity. In comparison, the relatively low specific surface areas of TiO2 and small average pore diameters of ZSM-5 had a negative impact on metal distribution and the subsequent catalytic reformation process; this was because of the inadequate reaction during the catalytic process. The Fe/Al2O3 catalyst produced a higher yield of carbon deposits (30.2 wt%), including over 65% high-value carbon nanotubes (CNTs) and hydrogen content (58.7 vol%). Additionally, more dispersive and uniform CNTs were obtained from the Fe/SiO2 catalyst. The Fe/TiO2 catalyst promoted the formation of carbon fibre twisted like fried dough twist. Notably, there was interesting correspondence between the size of the reduced Fe nanoparticles and the product distribution. Within certain limits, the smaller Fe particle size facilitates the catalytic activity. The smaller and better dispersed Fe particles over the support materials were observed to be essential for hydrocarbon cracking and the subsequent formation of carbon deposits. The findings from this study may provide specific guidance for the preparation of different forms of carbon materials.

A Novel Nickel Catalyst Supported on Coal Gangue for Producing Hydrogen and Carbon Nanotubes from Waste Plastics

Co-production of Hydrogen and Carbon Nanotubes from Real-World Waste Plastics: Influence of Catalyst Composition and Operational Parameters

Carbon nanotubes from post-consumer waste plastics: Investigations into catalyst metal and support material characteristics

Production of Carbon Nanotubes Via Catalytic Pyrolysis of Waste Plastics over Ni/Al2O3 Catalyst: the Influence of Plastic Types

Co-production of hydrogen and carbon nanotubes from catalytic pyrolysis of waste plastics on Ni-Fe bimetallic catalyst

Enhancement of hydrogen and carbon nanotubes production from hierarchical Ni/ZSM-5 catalyzed polyethylene pyrolysis

Production of carbon nanotubes via catalytic pyrolysis of waste plastics over Ni/Al 2 O 3 catalyst: The influence of plastic types

Simultaneous production of high-valued carbon nanotubes and hydrogen from catalytic pyrolysis of waste plastics: The role of cellulose impurity

High-yield H2 production from polypropylene through pyrolysis-catalytic reforming over activated carbon based nickel catalyst

Investigation of spherical alumina supported catalyst for carbon nanotubes production from waste polyethylene

Catalytic Synthesis of Carbon Nanotubes and Hydrogen Gas from Waste Plastics Using LaNiO3 Perovskite Catalyst

Catalytic pyrolysis of plastic waste using metal-incorporated activated carbons for monomer recovery and carbon nanotube synthesis

Catalytic Synthesis of Carbon Nanotubes and Hydrogen Gas from Waste Plastics Using LaNiO 3 Perovskite Catalyst

Product Selection Toward High-Value Hydrogen and Bamboo-Shaped Carbon Nanotubes from Plastic Waste by Catalytic Microwave Processing

Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst

In-situ exsolution of Fe-Ni alloy catalysts for H2 and carbon nanotube production from microwave plasma-initiated decomposition of plastic wastes

Microwave-carbon Fiber Cloth Co-Ignited Catalytic Degradation of Waste Plastic into High-Yield Hydrogen and Carbon Nanotubes

Sustainable production of hydrogen and carbon nanotubes/nanofibers from plastic waste through microwave degradation

Pyrolysis-catalysis of different waste plastics over Fe/Al2O3 catalyst: High-value hydrogen, liquid fuels, carbon nanotubes and possible reaction mechanisms

Carbon nanotubes production from catalytic pyrolysis of polyethylene over nickel-based catalysts: The influence of support materials

High-value Products from Ex-Situ Catalytic Pyrolysis of Polypropylene Waste Using Iron-Based Catalysts: the Influence of Support Materials.