Abstract:Abstract The previous results have shown that dense bismuth oxidebased electrolytes can be fabricated simply by plasma spraying owing to their low melting point. In this study, the Bi2O3– Er2O3–WO3 electrolyte of high ionic conductivity was deposited by the cost-effective plasma spraying to assemble the SOFC for examining its electrochemical performance. The SOFC cell consisted of FeCr24.5 metal support, NiO-YSZ anode, 10 mol% scandium oxide-stabilized zirconium oxide (ScSZ) electrolyte, (Bi2O3)0.705 (Er2O3)0.245 (WO3)0.05 (EWSB) electrolyte, and La0.6Sr0.4Co0.2Fe0.8O3 (LSCF) cathode. The ScSZ electrolyte interlayer was introduced between the anode and EWSB electrolyte to hinder the reduction of EWSB in the anode environment. NiO-YSZ, ScSZ, EWSB, and LSCF were deposited by plasma spraying on the metal support which was prepared by a press-forming-sintering process. The NiO-YSZ/ ScSZ/ EWSB/ LSCF single cell assembled with the as-sprayed ScSZ presented an open circuit potential of 0.90V at 600 °C and the maximum power density of 1130 mW cm-2 at 750 °C, 450 mW cm-2 at 650 °C, and 128 mW cm-2 at 550 °C. The plasma sprayed ScSZ electrolyte was then densified through impregnating using yttrium and zirconium nitrate solutions followed by annealing treatment. The single cell assembled with the densified ScSZ presented an open circuit potential up to 1.004V at 600 °C and the maximum power density of 1356 mW cm-2 at 750 °C, 619 mW cm-2 at 650 °C, and 163 mW cm-2 at 550 °C. The performance of the cell was significantly improved by the post-spray densification treatment of the ScSZ electrolyte. The present result shows that the high performance NiO-YSZ/ScSZ/EWSB/LSCF cell at intermediate temperatures can be successfully fabricated by plasma spraying.

Densification of Plasma-Sprayed YSZ Electrolyte by Suction Filtration Using Submicron/Nanoparticle Suspension for Metal-Supported SOFCs

Performance of YSZ Electrolyte Layer Deposited by Atmospheric Plasma Spraying for Cermet-Supported Tubular SOFC

Effect of densification processes on the properties of plasma-sprayed YSZ electrolyte coatings for solid oxide fuel cells

Preparation of yttria-stabilized zirconia electrolyte via atmospheric plasma spraying for metal-supported solid oxide fuel cells

Influence of YSZ Electrolyte Thickness on the Characteristics of Plasma-Sprayed Cermet Supported Tubular SOFC

Plasma-sprayed Y2O3-stabilized ZrO2 electrolyte with improved interlamellar bonding for direct application to solid oxide fuel cells

Modification of Microstructure and Electrical Conductivity of Plasma-Sprayed Ysz Deposit Through Post-Densification Process

Development of ScSZ Electrolyte by Very Low Pressure Plasma Spraying for High-Performance Metal-Supported SOFCs

Characterization of Self-Sealed Metal Supported SOFCs with the Very Low Pressure Plasma Sprayed ScSZ Electrolyte

Scandia-stabilized Zirconia Electrolyte with Improved Interlamellar Bonding by High-Velocity Plasma Spraying for High Performance Solid Oxide Fuel Cells

Characterization of YSZ Solid Oxide Fuel Cells Electrolyte Deposited by Atmospheric Plasma Spraying and Low Pressure Plasma Spraying

Performance of Tubular Solid Oxide Fuel Cell Assembled with Plasma-Sprayed Sc2O3–ZrO2 Electrolyte

Thin Yttria-Stabilized Zirconia Electrolyte and Transition Layers Fabricated by Particle Suspension Spray

Study of Slurry Spin Coating Technique Parameters for the Fabrication of Anode-Supported YSZ Films for SOFCs

Electrophoretic deposition of YSZ thin-film electrolyte for SOFCs utilizing electrostatic-steric stabilized suspensions obtained via high energy ball milling

Novel Approaches to Prepare the High Performance Dense Electolyte and Interconnect Applicable to SOFC by Atmospheric Plasma Spraying

Performance of Plasma-Sprayed Bi2O3–Er2O3–WO3 for Intermediate-Temperature Solid Oxide Fuel Cells (It-Sofcs)

Development of a Ni/Al 2 O 3 Cermet-Supported Tubular Solid Oxide Fuel Cell Assembled with Different Functional Layers by Atmospheric Plasma-Spraying

Preparation of YSZ Film by EPD and Its Application in SOFCs

Microstructure and Electrochemical Behavior of a Structured Electrolyte/LSM-Cathode Interface Modified by Flame Spraying for Solid Oxide Fuel Cell Application

Breakthrough in Atmospheric Plasma Spraying of High-Density Composite Electrolytes: Deposition Behavior and Performance of Plasma-Sprayed GDC-LSGM on Porous Metal-Supported Solid Oxide Fuel Cells