Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

Reduction Methodology of Eddy Losses in Ferrite Cores for High-Frequency Transformers Based on Loss-Effective Conductivity Extraction

Calculation Method of Winding Eddy-Current Losses for High-Voltage Direct Current Converter Transformers

Study on Influence of Processing Methods on Loss Coefficients of Iron Loss Model

Loss Analysis of Magnet Eddy Current in a High-Power Density Machine Using a Field-Circuit Coupled Model

A core loss estimation method based on improved waveform coefficient Steinmetz equation for asymmetric triangular flux density waveform

An Improved Core Loss Model of Ferromagnetic Materials Considering High-Frequency and Nonsinusoidal Supply

A DC Differential Method for Core Loss Measurement under Sinusoidal Excitation

Iron Loss Separation in High Frequency Using Numerical Techniques

High Frequency Magnetic Core Loss Study

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

In-Situ Measurement and Investigation of Winding Loss in High-Frequency Cored Transformers Under Large-Signal Condition

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

Novel magnetic core materials impact modelling and analysis for minimization of RF heating loss

Improvement on Loss Separation Method for Core Loss Calculation under High-Frequency Sinusoidal and Nonsinusoidal Excitation

Analysis of the Methods for Determining Losses in the Transformer Magnetic Core

High-Precision Simulation For Structure And Efficiency Optimization Of High-Power High-Frequency Transformer

A Novel Estimation Model for Hysteresis Loss Based on Semi-Minor Loops

A Novel DC Differential Method for High Frequency Core Loss Measurement

A Novel Hybrid Core Structure for 100kw Medium Frequency Transformers

A Novel Semi-Analytical Method for Foil Winding Losses Calculation Considering Edge Effect in Medium Frequency Transformers

High-frequency loss modeling of nanocrystalline core considering nonuniform distribution of flux density