Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

High-frequency loss modeling of nanocrystalline core considering nonuniform distribution of flux density

An Improved Core Loss Model of Ferromagnetic Materials Considering High-Frequency and Nonsinusoidal Supply

Wideband loss separation model of nanocrystalline materials considering microscopic magnetization mechanism

Improvement on Loss Separation Method for Core Loss Calculation under High-Frequency Sinusoidal and Nonsinusoidal Excitation

A core loss estimation method based on improved waveform coefficient Steinmetz equation for asymmetric triangular flux density waveform

High Frequency Magnetic Core Loss Study

Laminated nanocrystalline-ferrite high saturation magnetic flux density composite core for use in high-frequency transformers

Iron Loss Separation in High Frequency Using Numerical Techniques

High-Frequency Core Loss Modeling Based on Knowledge-aware Artificial Neural Network

Core loss measurement and comparative analysis for soft magnetic materials under complex non-sinusoidal excitations

A Practical, Accurate and Very General Core Loss Model for Nonsinusoidal Waveforms

Predicting Iron Losses in Laminated Steel with Given Non-Sinusoidal Waveforms of Flux Density

Core loss analysis of soft magnetic composite under non-sinusoidal excitation based on finite element models

Comparative Analysis of Core Loss Calculation Methods for Magnetic Materials Under Nonsinusoidal Excitations

A Novel Estimation Model for Hysteresis Loss Based on Semi-Minor Loops

Improved IGSE Core Loss Calculation Method Based on The Magnetic Density Distribution Characteristics of Large-Size Cores

Calculation of core loss under distorted flux density with minor hysteresis loops for laminated steel structure

Design of a Novel Rotary Transformer with Accurate Prediction of Nanocrystalline Alloy Core Loss using Improved Steinmetz Formulation

Novel magnetic core materials impact modelling and analysis for minimization of RF heating loss

Estimation of Energy Losses in Nanocrystalline FINEMET Alloys Working at High Frequency

A Review of Magnetic Core Materials, Core Loss Modeling and Measurements in High-Power High-Frequency Transformers