Abstract:The core used to build power inductors and transformers are soft magnetic materials. When there is alternating external field, the magnetic moments rotate and consume energy, which is the core loss. The core loss depends on the AC flux frequency, amplitude, waveform, DC bias and temperature. These dependences are nonlinear and difficult to predict. How to measure, model and analyze the core loss is a challenge for decades. In this dissertation, two new core loss measurement methods are introduced first. These two methods use the reactive cancellation concept to reduce the sensitivity to phase discrepancy, which will destroy the accuracy in classic two-winding method for high frequency high quality factor sample measurements. By using the new measurement techniques the accuracy can be improved by several orders. The first is for sinusoidal waveforms, and the second is for non-sinusoidal wave. The new methods enable high frequency core loss characterization capability, which will help scientists and engineers on material research and inductor/transformer design. Measurement examples, considerations and error analysis are demonstrated and discussed in detail. With the measurement techniques, the core loss under rectangular AC voltage and DC bias current are investigated. A new core loss model named rectangular extension Steinmetz equation (RESE) is proposed based on the measurement results. The new iii model is shown to be more accurate than the existing core loss models. Several commercially available MnZn ferrites are characterized and modeled. Other than conventional MnZn ferrite materials, three commercial LTCC ferrite materials are characterized for integrated power supply applications. Based on characterized properties of these LTCCs, a group of new LTCC ferrites are fabricated and tested. The new LTCC is fabricated by laminating commercial LTCC tapes and co-firing. The new LTCC is demonstrated to have over 50% more inductance over the commercial LTCC materials. This work indicates that the power electronics engineers should work with material engineers to get the optimum material for a given application. In the last part, the core loss of the partially saturated lateral flux planar inductor is analyzed. The challenge of the analysis is the complexity of the distribution of bias field and flux density in a highly biased planar inductor. Each point in the core is working at different excitation and bias condition, and the core loss density is very non-uniform. The proposed method combines the characterization tested in previous chapters and the commercial finite element tool. Experiments verified that the calculation errors are within about 10%. In conclusion, the research in this dissertation proposed a complete solution to measure, model and analyze the high frequency core loss. This solution will not only facilitate fundamental research on physics understanding and material innovation, but also development of power electronics and RF applications.

Wideband loss separation model of nanocrystalline materials considering microscopic magnetization mechanism

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

High-frequency loss modeling of nanocrystalline core considering nonuniform distribution of flux density

Study on Influence of Processing Methods on Loss Coefficients of Iron Loss Model

An Improved Core Loss Model of Ferromagnetic Materials Considering High-Frequency and Nonsinusoidal Supply

A Novel Estimation Model for Hysteresis Loss Based on Semi-Minor Loops

Effects of magnetic domain morphology on the magnetic spectrum and high‐frequency core losses of MnZn ferrites

Modeling dynamic magnetostriction of amorphous core materials based on Jiles–Atherton theory for finite element simulations

Improvement on Loss Separation Method for Core Loss Calculation under High-Frequency Sinusoidal and Nonsinusoidal Excitation

Modeling analysis of pulsed magnetization process of magnetic core based on inverse Jiles-Atherton model

Iron Loss Separation in High Frequency Using Numerical Techniques

Modeling of Fe-Based Soft Magnetic Materials for Multiphysical Analysis of Medium-Frequency Transformers

High Frequency Magnetic Core Loss Study

Micromagnetics Study Of The Magnetic Nano-Granular Films

Loss Separation of Amorphous and Nanocrystalline Fe85−xCoxNb7B8 Alloys in Weak Magnetic Field at Low Frequency

Core loss measurement and comparative analysis for soft magnetic materials under complex non-sinusoidal excitations

Design of a Novel Rotary Transformer with Accurate Prediction of Nanocrystalline Alloy Core Loss using Improved Steinmetz Formulation

An instant loss analysis model for complex magnetic core materials

Why MagNet: Quantifying the Complexity of Modeling Power Magnetic Material Characteristics

A core loss estimation method based on improved waveform coefficient Steinmetz equation for asymmetric triangular flux density waveform

A Practical Hybrid Hysteresis Model for Calculating Iron Core Losses in Soft Magnetic Materials