Abstract:Thermal chemical processing of plastic has been seen as an efficient practice for the disposal and resource utilization facing the current plastic waste problem. A pyrolysis followed by catalytic decomposition process was investigated in this work to produce carbon materials from polypropylene plastic over FeNi catalysts. The effects of both catalysis temperature (600, 700 and 800 degrees C) and catalyst type on the gaseous yields, as well as the physicochemical properties (morphology, porosity, purity and graphitization degree) of the as-obtained carbon materials were systematically explored. Various technologies including high resolution electron microscopies, temperature programmed oxidation, Raman, X-ray diffraction were used for full characterizations of the as-obtained carbons. Results show that the yields of both carbon and hydrogen gas were significantly proportional to the catalysis temperature. In terms of the physiochemical properties of carbon materials, the low catalysis temperature of 600 degrees C generated the majority amorphous and disordered carbons, due to the insufficient decomposition reactions and low catalyst activity. Catalysis temperature higher than 700 degrees C was necessary for the successful growth of carbon nanotubes, while further increase in temperature mainly acted on the yield rather than thermal stability and graphitic degree. High purity multi-walled carbon nanotubes with outer diameters of 20-30 nm and length up to few micrometers were generated with FeNi1 at 800 degrees C. FeNi1 catalyst synthesized by sol-gel method displayed higher activity towards the production of high quality carbon materials than FeNi2 catalyst at any temperature range investigated, due to the porous structure and the uniform dispersion of metal particles.

Investigating the Influences of Metal-Support Interaction in Ni-Fe Catalysts on the Quality of Carbon Nanomaterials from Waste Polypropylene

Investigating the influences of metal-support interaction in NiFe catalysts on the quality of carbon nanomaterials from waste polypropylene

Effect of support texture properties on Ni-Fe/γ-Al_2O_3 catalyst structure and catalytic performance for CO methanation

Carbon nanotubes production from catalytic pyrolysis of polyethylene over nickel-based catalysts: The influence of support materials

Co-pyrolysis of Chinese herb residue and polypropylene over Ni, Fe, Co and Cu/AC: Co-production and formation mechanism of carbon nanomaterials, liquid oil and pyrolysis gas

Conversion of Waste Plastic Packings to Carbon Nanomaterials: Investigation into Catalyst Material, Waste Type, and Product Applications

Carbon nanotubes from post-consumer waste plastics: Investigations into catalyst metal and support material characteristics

N-doped carbon carriers loaded with NiX (X = Fe, Co, Cu): Catalytic synergistic pyrolysis of herbal residues and polypropylene to generate three-phase products and carbon nanotubes

Co-production of Hydrogen and Carbon Nanotubes Via Catalytic Pyrolysis of Polyethylene over Fe/ZSM-5 Catalysts: Effect of Fe Loading on the Catalytic Activity

Investigation of spherical alumina supported catalyst for carbon nanotubes production from waste polyethylene

Enhancement of hydrogen and carbon nanotubes production from hierarchical Ni/ZSM-5 catalyzed polyethylene pyrolysis

Fabrication of Fe-Zr, Co-Zr, and Ni-Zr Catalysts to Boost CNTs Synthesis from Plastic Wastes and the Electrocatalytic Oxygen Evolution Reaction

In-situ exsolution of Fe-Ni alloy catalysts for H2 and carbon nanotube production from microwave plasma-initiated decomposition of plastic wastes

Production of carbon nanotubes via catalytic pyrolysis of polyethylene over Ni/ZSM-5 prepared by ethylene glycol assisted impregnation

Production of catalytic-upgraded pyrolysis products from oiltea camellia shell and polypropylene using NiCe-X/Al2O3 and ZrO2 catalyst (X = Fe, Co)

Catalytic reforming of polypropylene to produce hydrogen: Influence of support characteristics and active metal type in catalyst

Bimetallic Carbon Nanotube Encapsulated Fe-Ni Catalysts from Fast Pyrolysis of Waste Plastics and Their Oxygen Reduction Properties

Catalytic upcycling of waste polypropylene for gram-scale production of FeCo@N-doped carbon nanotubes toward efficient oxygen reduction electrocatalysis

Preparation of high quality carbon nanotubes by catalytic pyrolysis of waste plastics using FeNi-based catalyst

Impact of Temperature on the Activity of Fe-Ni Catalysts for Pyrolysis and Decomposition Processing of Plastic Waste

Influence of the Ratio of Fe/Al2O3 on Waste Polypropylene Pyrolysis for High Value-Added Products