Abstract:The lack of comprehensive insight and accurate description on the dynamic thermomechanical behaviors in high-temperature and high-strain-rate loading environment could be one of the major obstacles to extend the laser metal deposited (LMD) Inconel 718 to engineering applications in aeroengine. In this study, to obtain in-depth understanding of plastic flow behavior of the LMD Inconel 718, uniaxial compressive experiments were conducted over a wide range of temperature (298-1273 K) and strain rate (0.001-5300/s). Based on a great number of experimental results, not only the anisotropy of compressive property, but the dependence of the plastic flow stress on temperature and strain rate were investigated systematically. The flow stress of the as deposited alloy in laser scanning direction is higher than that in depositing direction, which is attributed to the columnar grains epitaxially growing along the build direction and featuring the high length-diameter ratio within the as-deposited sample. Since the small-size precipitates in the under-aged (as-deposited) Inconel 718 alloy could be cut by the moving dislocations directly during plastic deformation, they have various effect on the interaction between moving dislocations and interstitial elements at different strain rate. The third-type of strain aging (3rd SA) effect, exhibiting an anomalous bell-shaped flow stress vs. temperature relation, was observed more apparently than that in the post-aged Inconel 718 reported by other literatures. As for the strain-rate effect, the flow stress of the alloy exhibits inconspicuous strain-rate sensitivity over the range of strain rate below similar to 10(3)/s, while increases sharply with the strain rate once it exceeds similar to 10(3)/s. Finally, taking into account the mechanical anisotropy, as well as the anomalous temperature and strain rate sensitivities of the flow stress, we developed a constitutive model based on a physical frame. In this model, an anisotropy component was introduced to consider the effective size of columnar grains in the corresponding loading direction, the strain rate hardening was enhanced as the strain rate gets close to a certain level, and a normal distribution with temperature was used to describe the 3rd SA effect. The developed model was shown to be able to accurately reproduce the plastic flow behavior of the LMD Inconel 718 over a wide range of temperature and strain rate.

Identification and Formulation of Stress-Strain Relationship for Pure Nickel and Inconel 718 in a Wide Strain Rate Range （10&Lt;sup>−3</sup>/ss~10<sup>4</sup>/ss）

Ultrahigh-Strain-Rate-Dependent Material Modeling and Experimental Observation for Studying Cold-Spray-Induced Extreme Plastic Deformation in Pure Nickel Particles

Comparison in Deformation Behavior, Microstructure, and Failure Mechanism of Nickel Base Alloy 625 under Two Strain Rates

High Strain Rate Yielding of Additive Manufacturing Inconel 625 by Selective Laser Melting

Serrated flow behavior and microstructure evolution of Inconel 625 superalloy during plane-strain compression with different strain rates

Hot Deformation of Spray Formed Nickel-Base Superalloy Using Processing Maps

The Formation And Evolution Of Shear Bands In Plane Strain Compressed Nickel-Base Superalloy

CHARACTERISTICS OF HOT COMPRESSION DEFORMATION AND MICROSTRUCTURE EVOLUTION OF SPRAY FORMED NICKEL BASE SUPERALLOY

Neutron Diffraction Study on Strain Rate Dependent Mechanical Response in Superelastic NiTi Alloy: Bulk Structural Evolution and Constitutive Model

Deformation Behavior and Numerical Simulation of a Casting AM80 Magnesium Alloy under High Strain Rate Loading

High Strain Rate Compressive Deformation Behavior of Nickel Microparticles

Thermomechanical Behavior of Laser Metal Deposited Inconel 718 Superalloy over a Wide Range of Temperature and Strain Rate: Testing and Constitutive Modeling

The Effect of Strain Rate on the Tensile Deformation Behavior of Single Crystal, Ni-Based Superalloys

Research on microplastic deformation of Inconel718 under the conditions of high temperature and high strain rate

Hot Compression Deformation Characteristics of Nimonic Alloy As-Forged

The Dependence of Stress and Strain Rate on the Deformation Behavior of a Ni‐based Single Crystal Superalloy at 1050°C

Experimental and Numerical Investigations of Dynamic Strain Ageing Behaviour in Solid Solution Treated Inconel 718 Superalloy

Effect of Strain Rate on Microstructure Evolution of a Nickel-Based Superalloy During Hot Deformation

Molecular Dynamics Simulations of the Tensile Mechanical Response of Single Crystal/Polycrystalline Nickel

The Effects of Strain Rate and Carbon Concentration on the Dynamic Strain Aging of Cold Rolled Ni-Based Alloy in High Temperature Water

Strain-Rate Sensitivity of Tensile Behaviors for Nickel-Based Superalloys Gh3044 and Gh4033 at Room Temperature

Identification and Formulation of Stress-Strain Relationship for Pure Nickel and Inconel 718 in a Wide Strain Rate Range （10&Lt;sup&gt;−3&lt;/sup&gt;/ss~10&lt;sup&gt;4&lt;/sup&gt;/ss）