Abstract:Ni nanoparticles supported on ZrO2 are a prototypical system for reforming catalysis converting methane to synthesis gas. Herein, we examine this catalyst on a fundamental level using a 2-fold approach employing industrial-grade catalysts as well as surface science based model catalysts. In both cases we examine the atomic (HRTEM/XRD/LEED) and electronic (XPS) structure, as well as the adsorption properties (FTIR/PM-IRAS), with emphasis on in situ/operando studies under atmospheric pressure conditions. For technological Ni-ZrO2 the rather large Ni nanoparticles (about 20 nm diameter) were evenly distributed over the monoclinic zirconia support. In situ FTIR spectroscopy and ex situ XRD revealed that even upon H2 exposure at 673 K no full reduction of the nickel surface was achieved. CO adsorbed reversibly on metallic and oxidic Ni sites but no CO dissociation was observed at room temperature, most likely because the Ni particle edges/steps comprised Ni oxide. CO desorption temperatures were in line with single crystal data, due to the large size of the nanoparticles. During methane dry reforming at 873 K carbon species were deposited on the Ni surface within the first 3 h but the CH4 and CO2 conversion hardly changed even during 24 h. Post reaction TEM and TPO suggest the formation of graphitic and whisker-type carbon that do not significantly block the Ni surface but rather physically block the tube reactor. Reverse water gas shift decreased the H2/CO ratio. Operando studies of methane steam reforming, simultaneously recording FTIR and MS data, detected activated CH4 (CH3 and CH2), activated water (OH), as well as different bidentate (bi)carbonate species, with the latter being involved in the water gas shift side reaction. Surface science Ni-ZrO2 model catalysts were prepared by first growing an ultrathin "trilayer" (O-Zr-O) ZrO2 support on an Pd3Zr alloy substrate, and subsequently depositing Ni, with the process being monitored by XPS and LEED. Apart from the trilayer oxide, there is a small fraction of ZrO2 clusters with more bulk-like properties. When CO was adsorbed on the (fully metallic) Ni particles at pressures up to 100 mbar, both PM-IRAS and XPS indicated CO dissociation around room temperature and blocking of the Ni surface by carbon (note that on the partially oxidized technological Ni particles, CO dissociation was absent). The Ni nanoparticles were stable up to 550 K but annealing to higher temperatures induced Ni migration through the ultrathin ZrO2 support into the Pd3Zr alloy. Both approaches have their benefits and limitations but enable us to address specific questions on a molecular level.

Understanding the Mechanism of CO2 Reforming of Methane to Syngas on Ni@Pt Surface Compared with Ni(1 1 1) and Pt(1 1 1)

New Mechanism Insights into Methane Steam Reforming on Pt/Ni from DFT and Experimental Kinetic Study

Promoted coke resistance of Ni by surface carbon for the dry reforming of methane

Modulating Proportion of Ni0 Species Stabilized by Ni2+ on Ni-MgO Catalyst with Superior Stability for Dry Reforming of Methane

Mechanistic and microkinetic insights into the stability and activity of Ni 3 In catalyst for dry methane reforming

Mechanism study on carbon atom growth on different Ni facets in CO 2 reforming reaction

Dynamic Oxygen on Surface: Catalytic Intermediate and Coking Barrier in the Modeled Co2 Reforming of Ch4 on Ni (111)

Understanding the Transformation Mechanism of Carbon Species on Different Nickle Facets in CO2 Reforming Reaction

Mechanistic and Microkinetic Insights into the Stability and Activity of Ni3In Catalyst for Dry Methane Reforming

Surface Spectroscopy on UHV-Grown and Technological Ni-ZrO2 Reforming Catalysts: From UHV to Operando Conditions

Deciphering the Stability Mechanism of Pt-Ni/Al2O3 Catalysts in Syngas Production Via DRM

Remarkable Basic-Metal Oxides Promoted Confinement Catalysts for CO2 Reforming

Activity and stability of alloyed NiCo catalyst for the dry reforming of methane: A combined DFT and microkinetic modeling study

Investigation into the coking-related key reaction steps in dry reforming of methane over NiMgO x catalyst

First principles study on methane reforming over Ni/TiO2(110) surface in solid oxide fuel cells under dry and wet atmospheres

Ni-modified Mo2C Catalysts for Methane Dry Reforming

Robust and Coke-free Ni Catalyst Stabilized by 1–2 nm-Thick Multielement Oxide for Methane Dry Reforming

Density Functional Theory-Assisted Microkinetic Analysis of Methane Dry Reforming on Ni Catalyst

Dry Reforming of Methane on NiCu and NiPd Model Systems: Optimization of Carbon Chemistry

Mechanistic of Coke-Resistance Ni/ZrO2 Catalyst for Dry Reforming of Methane Under External Electric Fields: A Combined First-Principles and Microkinetic Modeling Study

Structure Sensitivity in Steam and Dry Methane Reforming over Nickel: Activity and Carbon Formation