Microstructure Study on Very-High-Cycle Fatigue of an Addi-tively Manufactured Aluminium Alloy Via Advanced Charac-terization Methods

Lu Liu,Shengnan Wang,Gang Li,Yifan Ma

DOI: https://doi.org/10.3390/app14052025

2024-01-01

Abstract:The engineering application of additively manufactured (AM) metallic materials is quite limited by their fatigue behaviors, which are very inconsistent with that of conventionally wrought or cast ones. Here, based on advanced material characterization techniques, such as focused ion beam (FIB), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), the microstructures underneath fracture surfaces were thoroughly investigated in an AM aluminum (AlSi10Mg) alloy with horizontal and vertical building orientation enduring very high cycle fatigue (VHCF) loading under the stress ratios R = −1, 0, and 0.5. Two VHCF failure specimens A and B were representatively selected to further examine SEM and TEM sample preparation via FIB milling. Specimen A was horizontally printed and failed at R = −1; specimen B was vertically printed and failed at R = 0. TEM samples A1 and B1 were lifted from locations near the crack initiation sites on the fracture surfaces of specimens A and B; The locations of TEM samples A2 and B2 kept away from the crack origin sites but still within the “fish-eye” region of crack steady growth. TEM observations show that there was no characteristic microstructure induced by VHCF in different oriented specimens and under various R values.