Abstract:A low temperature drift curvature-compensated complementary metal oxide semiconductor (CMOS) bandgap reference is proposed. A dual-differential-pair amplifier was employed to add compensation with a high-order term of TlnT (T is the thermodynamic temperature) to the traditional 1st-order compensated bandgap. To reduce the offset of the amplifier and noise of the bandgap reference, input differential metal oxide semiconductor field-effect transistors (MOSFETs) of large size were used in the amplifier and to keep a low quiescent current, these MOSFETs all work in weak inversion. The voltage reference’s temperature curvature has been further corrected by trimming a switched resistor network. The circuit delivers an output voltage of 3 V with a low dropout regulator (LDO). The chip was fabricated in Taiwan Semiconductor Manufacturing Company (TSMC)’s 0.35-μm CMOS process, and the temperature coefficient (TC) was measured to be only 2.1×10−6/°C over the temperature range of −40–125 °C after trimming. The power supply rejection (PSR) was −100 dB @ DC and the noise was 42 μV (rms) from 0.1 to 10 Hz.

A 1.9V<sub>rms</sub> 7.7ppm/C ADC Reference with 20mA Output Current and Single-Trim Inaccuracy of 0.03%(3) from-40C to 125C

A 1.9μvrms 7.7ppm/°c ADC Reference with 20ma Output Current and Single-Trim Inaccuracy of ±0.03%(3σ) from -40°C to 125°C

A Low Drift Curvature-Compensated Bandgap Reference with Trimming Resistive Circuit

A current reference based on bandgap technology with wide input voltage range by using 0.18µm BCD process

A 2.2ppm/°c Compensated Bandgap Voltage Reference with a Double-Ended Current Trimming Technique.

A High Precision Circuit of Bandgap Voltage Reference

A New Digital to Analog Converter Based on Low-Offset Bandgap Reference.

A Sub-1-V Nanopower MOS-Only Voltage Reference

3.4 A 14b 98Hz-to-5.9khz 1.7-to-50.8 Μ W BW/Power Scalable Sensor Interface with a Dynamic Bandgap Reference and an Untrimmed Gain Error of ± 0.26 % from −40°C to 125°C

A Precision Voltage Reference Circuit with Trimming for 16-Bit SAR ADC in 55nm CMOS Technology

A 14-Ppm/v 1.5-Ppm/°c Reference Voltage Source with a Wide Input Range of 4.5-35V

A 1.2 V,9 Ppm/℃ CMOS Bandgap Voltage Reference

A 1V Ultra-Low Power High Precision CMOS Voltage Reference

A 1.2 Ppm/°c TC, 0.094% Inaccuracy 3-18 V Supply-Range Bandgap Reference with Self-Compensation

A 1V, 240 Nw, 7 Ppm/°c, High PSRR CMOS Voltage Reference Circuit with Curvature-Compensation

A High Performance Differential Reference Voltage Generator Used in ADC

A2.1-ppm/°C Current-Mode CMOS Bandgap Reference with Piecewise Curvature Compensation.

A 1.2-V 2.18-ppm/°C curvature-compensated CMOS bandgap reference

A 1.8 V 0.918 Ppm/°c CMOS Bandgap Voltage Reference with Curvature-Compensated

A 3.95 ppm/°C 7.5 μW Second-Order Curvature Compensated Bandgap Reference in 0.11 μm CMOS

A Sub-1ppm/°C Current-Mode CMOS Bandgap Reference with Piecewise Curvature Compensation